How do I enable WEP encryption so my older devices can connect?

This FAQ applies to hardware revision B

Step 1: Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or into the address bar.

Step 2: Enter the password for your Admin account in the field provided. If you have not changed this password from the default, leave the field blank. Click Log In.

Step 3: Move the cursor to the Settings tab and then click Wireless from the drop-down menu.

D:\07869\Documents\Work\FAQ\DIR-868L FAQ\B1\2014-08-18_095311.png

Step 4: Click Advanced Settings… for the band you wish to change the wireless security mode for.

Step 5: Select WEP from the Security Mode drop-down menu.

Step 6: Enter the desired Password in the field provided.

Click Save to save your configuration.

Rank: 1.5

Podobné témata: