How to Setup DSP‑W215 with an iPad?

Requirements:

• iPad
• Quick Install Card
• QR Code Reader

Step 1 – Insert the DSP-W215 into a Power Socket and press and hold the reset button for 10 seconds until you get the “Orange” LED flashing
Step 2 – Open the iPad and go to App Store and download the mydlink Home App

D-Link
 
Step 3 – Once installed, tap the on the mydlink Home icon on your iPad and enter your mydlink account details to login

D-Link
 
Tap “Done” then “Sign in”

Step 4 – Tap on the “+” to add new device

D-Link
 

Step 5 – You will be presented with the “QR Code Setup”

D-Link
 
Here you have 2 options:

1. Tap “Next” to scan the QR Code
2. Tap “Skip QR Code”

Step 5a – Tap “Next” to scan the QR Code

Pass the “QR Code” located on the reverse side of the “Quick Install Card” in front of the QR Code Reader

D-Link
 
Then go to Step 6

D-Link

Step 5b – Tap Skip QR Code then Tap Sensor and finally tap DSP-W215

D-Link 

Step 6 – Ensure the DSP-W215 is plugged into a power socket

D-Link

 
Tap “Next

Step 7 – Ensure there is a flashing “Orange” LED

D-Link
 
Tap “Next

Step 8 – Here you will be presented with 2 options:

1. Configure Manually – Tap “Manual” and go to Step 8a
2. Configure with WPS (if your Router or Wireless device supports this) – Tap “Next” and go to Step 8b

D-Link

 
Step 8a – Tap “Manual

D-Link
 
Don’t tap next, go to Step 9

Step 8b – If your router supports WPS, press the button marked   D-Link  or WPS and the same button on the DSP-W215 then tap “Next

D-Link

D-Link
 

Press the WPS button on your Router and your device together when the LED blinks “Green” then tap “Next”. When the LED is solid green, tap “Green” then go to Step 11

If you get the following message. Please check connection and select either of the following: Tap to “Restart hardware setup” to go back to Step 5 or tap “Search again” to go back to Step 11

dsp-w215_configure_on_an_ipad 

Step 9 – Tap “Home” button on the iPad > Settings > Wi-Fi

Then connect to the Wi-Fi of the DSP-XXXX.

In our example it was “DSP-D754”

D-Link
 
Step 10
– Once connected to the Wi-Fi of the DCH-S150, return to the mydlink Home

D-Link
 
Tap “Next

Step 11 – The wizard will now be “Searching for your device…”

 D-Link

Step 12 – Tap to select the device to connect then enter the “PIN Code” located on the “Quick Install Card”

D-Link

D-Link 

Tap “Next

Step 13 – Tap to choose the Wi-Fi network you wish to connect to (Ignore this if you are using WPS and go to Step 17)

D-Link

Step 14 – Tap “Home” button on the iPad go to Settings then Wi-Fi

Then connect to the Wi-Fi of what was selected in Step 13
In our example it was “dlink_TEST

D-Link 

D-Link

Tap “Next

Step 15 – The wizard will now be “Searching for your device…”
 

D-Link 

Step 16 – Tap to select the device to connect and wait until you see the next screen

D-Link
 

Step 17 – Here you can rename the device for example, “Living Room”. In our example we have given as default “DSP-W215

D-Link
 
Tap on “Done”

Step 18 – Here you can see the new device has been added and ready to be configured

D-Link
 
Step 19 – Tap the D-Link button to turn on the device

 

Rank: 1.5