Step 1 – Insert power cable into the DCS-5010L, wait until a solid “Green” LED is present then insert a pin into the reset button then press and hold the reset button for 10 seconds until “Power” LED shows “Red”
Step 2 – Open the iPad and go to App Store and download the mydlink Home App
Step 3 – Once installed, tap the on the mydlink Home icon on your iPad and enter your mydlink account details to login
Tap “Done” then “Sign in”
Step 4 – Tap on the “+” to add new device
Step 5 – You will be presented with the “QR Code Setup”
Here you have 2 options:
1. Tap “Next” to scan the QR Code
2. Tap “Skip QR Code”
Step 5a – Tap “Next” to scan the QR Code
Pass the “QR Code” located on the reverse side of the “Quick Install Card” in front of the QR Code Reader
Then go to Step 6
Step 5b – Tap Skip QR Code then Tap Camera and finally tap DCS-5010L
Step 6 – Ensure the DCS-5010L is plugged into a power socket
Step 7 – Ensure there is a flashing “Green” LED
Step 8 – Here you will be presented with 2 options:
1. Configure Manually – Tap “Manual” and go to Step 8a
2. Configure with WPS (if your Router or Wireless device supports this) – then go to Step 8b
Step 8a – Tap “Manual”
Don’t tap next, go to Step 9 Step 8b – If your router supports WPS, press the button marked or WPS and then tap “Next”
When the LED blinks “Green” then tap “Next”. You should get a solid green LED, when you do tap “Green” then go to Step 15
If you get the following message. Please check connection and select either of the following: Tap to “Restart hardware setup” to go back to Step 5 or tap “Search again” to go to Step 11
Step 9 – Tap “Home” button on the iPad >Settings> Wi-Fi
Then connect to the Wi-Fi of the DCS-5010L-XXXX.
In our example it was “DCS-5010L-6B0D”, enter the Wi-Fi password (located on reverse side of the “Quick Install Card” and tap “Join”
Step 10 – Once connected to the Wi-Fi of the DCS-5010L, return to the mydlink Home
Step 11 – The wizard will now be “Searching for your device…”
Step 12 – Tap to select the device then go to Step 17
Step 13 – Tap to choose the Wi-Fi network you wish to connect to
Step 14 – Tap “Home” button on the iPad > Settings > Wi-Fi
Then connect to the Wi-Fi of what was selected in Step 13
In our example it was “DIR_InDSR-500”
Tap “Next” then enter the Password and tap “Done” then go to Step 16
Step 15 – The wizard will now be “Searching for your device…”
Step 16 – Tap to select device
Step 17 – Select the “Time Zone” by tapping
Step 18 – Choose a password for the DCS-5010L and also a name (In our example we have given “admin,123” as the password and given the name as default)
Step 19 – You will now see the camera is now added to “My Devices”
4 people found this useful.
Did you find this useful?
4 people found this useful.
Thank you for your feedback.
Sorry we couldn't help! Click here for more FAQs or go to Support.
These may also help:
How do I setup my DCS-5010L on my Android device?Read Answer
How do I set up PTZ presets in the DCS-5010L?Read Answer
How do I configure motion detection on my DCS-5010L using my Android device?Read Answer
How to See Device Information DCS-5010L with an iPad?Read Answer
How do I see information about my DCS-5010L using my Android device?Read Answer