24‑Port xStack L3 SFP Stackable Managed Switch with Optional 10 Gigabit Uplinks


  • Product Status: Phased Out
The xStack DGS-3600 series of next generation Layer 3 Gigabit switches delivers performance, flexibility, security, multi-layer QoS and access, and redundant power option for SMB and enterprises. With high Gigabit port densities, SFP support, and advanced software functions, these switches can act as departmental accesslayer devices or core switches to form a multi-level network structured with high-speed backbone and centralized servers. Telecom service providers can also take advantage of the high SFP density switches to form the core of their Fiber to the building (FTTB) network that extends to the subscribers' sites.

Unparalleled Flexibility.

Easy to deploy and simple to managed, the DGS-3600 series can be stacked with any switches supporting D-Link's Single IP Management to form a multi-level network structured with backbone and centralized high-speed servers. This virtual stack can comprise units located anywhere on the same network domain. It can eliminate single points of failures, cable distance barriers, physical stacking method limitations and the need for stacking cabling.

Stackable Up to 12 Units

The DGS-3627G switch has two optional ports to install stacking modules that provide up to 40Gbps in data stacking backplane, full-duplex. This enhances your overall network performance for switches transmitting large files such as graphics or pictures. Under stacking mode, the switches are hot-swappable. This means that in a stack configuration, any of the switches can be replaced or removed without affecting the network. There is no need to reconfigure a replacement switch; just give the new switch the same stack number ID as the old switch and the network will carry the same configuration as before. This minimizes network downtime and maximizes the productivity of your business. Also, to facilitate network administration, cross stack port mirroring and port trunking are supported.

Security, Performance & Availability.

The DGS-3600 series provides a complete set of security features, which includes L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. In addition, it offers suppression capabilities and Layer 3 IP v4/v6 Static Routing to increase network performance and security. Built-in D-Link ZoneDefense2 technology allows business to integrate the switch stack with D-Link NetDefend firewalls to implement a full coverage, proactive security architecture.

The DGS-3600 series offers extensive VLAN support including GARP/GVRP and 802.1Q VLAN to enhance security and performance. To support converged applications including VoIP, ERP, Intranet and video conference, a robust set of L2/L3/L4 QoS/CoS features ensures that critical network services are served with proper priority. To prevent malicious flooding traffic caused by worm/virus infections, the DGS-3600 series provides D-Link Safeguard Engine to increase the switch's reliability, serviceability and availability. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, per-flow bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.

Actual product appearance may differ from the image displayed on this page

Related Products

1‑Port mini GBIC module for 1000BaseLX (LC duplex)
Find out more
1‑port multi‑mode 1000Base‑SX Mini GBIC Gigabit Ethernet modul (550 m)
Find out more
3m Cable for D‑Link 10GbE CX4 Module
Find out more
  • 24 Gigabit SFP portar
  • 4 10/100/1000Base-T portar (som combo med 4 av SFP-portarna)
  • 3 modulplatser för 10 Gigabit-upplänkar
  • Konsolport (RS-232)
  • Switch fabric: 108Gbps
  • Redundant strömförsörjning som tillval
  • Upp till 12 enheter per stack
  • 802.3ad länkaggregering (porttrunkning)
  • 802.1D, 802.1w och 802.1s Spanning Tree
  • Virtuell stack med upp till 32 enheter
  • Inbyggd D-Link Single IP Management (SIM)
  • Flernivå accesskontroll (nivå 2/3/4)
  • Tidsbaserad ACL
  • Stöd för extern RADIUS/TACACS+ autentisering
  • SSH/SSL support
  • 802.1x gäst-VLAN
  • Webbaserad accesskontroll (WAC)
  • MAC-baserad accesskontroll (MAC)
  • IP-MAC bindning
  • IP-MAC-portbindning
  • D-Link Safeguard Engine™
  • ZoneDefense med D-Link NetDefend brandväggar
  • Stöder Microsoft® NAP
Nivå 3 funktioner
  • IPv4/v6 statisk och dynamisk routing
  • RIP v1, RIP v2, OSPF v2, passivt gränssnitt, NSSA
  • VRRP
  • IP Multicast: IGMP v1, v2, v3, DVMRP v3, PIM DM och SM för IPv4
  • IGMP/MLD snooping
Quality of Service (QoS)
  • 802.1p prioriterade köer/Flernivå CoS
  • Bandbreddskontroll per port (finjustering ner till 64 kbps per port)
  • Trafiksegmentering
  • Broadcast / Multicast Storm kontroll (finjustering ner till 1 pps per port)
  • GUI trafikövervakning
  • RMON support
  • Portspegling
  • Webbaserad konfiguration och administration
  • Command Line Interface (CLI) kommandoradsgränssnitt
  • SNMP v.1, v.2c, v.3 standard
  • D-View SNMP modul för nätverksövervakning
  • Telnet server
  • Dubbla bilder/konfigurationer
  • Automatisk DHCP-konfiguration
  • DHCP Option 82
Fysisk miljö
  • Värmeutveckling: 262.74  BTU/tim
  • MTBF: 88 685 tim


  • What is the default IP address of my D Link Managed Switch ? Read Answer
Version Date Type File Size
Datasheet - PDF 1.04mb Download
Version Description Date Type File Size
Manual Manual - PDF 10.22mb Download
Version Description Date
Firmware 2.80B35 Firmware 2010-07-18 Download
Version Description Date
MIB Software 2.50B25 MIB Software 2010-06-28 Download
Version Description Date
DEU_CE_Declaration_RevA CE Declaration 2009-06-04 Download
DEU_Cli_Manual_RevA Cli Manual - Download
DEU_Web_UI_Ref_RevA Web UI Reference - Download