Wireless AC1200 DualBand Unified Access Point


  • Product Status (Revision B): Live
The DWL-6610APE Wireless AC1200 Dual-Band Unified Access Point is designed for small to medium businesses and enterprises, providing unparalleled bandwidth and flexibility for medium to large scale Wi-Fi networks. Featuring the latest 802.11ac technology on its 5 GHz band, the DWL-6610APE allows you to deploy more devices and provide greater throughput for your wireless clients.

Download the datasheet.

List Retailers

Performance without Compromise

The DWL‑6610APE is an affordable, Unified Wireless AC1200 Access Point, enabling businesses of all sizes create the fastest wireless network possible. With a sleek and stylish design, the DWL‑6610APE can be discreetly deployed anywhere.

DWL-6610APE Front

Key Features

DWL-6610APE AC 1200
Wireless AC 1200

Maximum combined wireless speed of 1200 Mbps.*

DWL-6610APE Broadcast to 32 APs
Broadcast on 32 SSIDs Simultaneously

Supports up to 32 SSIDs, 16 per radio, including station isolation.

DWL-6610APE Dual Band
Dual Band

Supports both 2.4Ghz and 5Ghz bands simultaneously.

DWL-6610APE unified wireless
Unified Wireless

Access points can be managed by unified wireless controller.

Smart Design

The DWL-6610APE can be mounted easily onto any wall or ceiling without looking out of place in an office or home. Enclosed in a plenum-rated UL2043 certified housing, the DWL-6610APE adheres to strict fire codes for placement in air passageways.

DWL-6610APE Top and bottom

Band Steering technology

With band steering, the DWL-6610APE detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network.

DWL-6610APE Band Steering
DWL-6610APE Versatility

Versatility Built as standard

Whether you intend to use a single Access Point or roll out a large corporate network, the DWL-6610APE coupled with a D-Link Wireless Controller or Unified Switch makes managing your wireless network simple.

Secure and Green Design

The DWL-6610APE has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

DWL-6610APE Power saving

Fast Seamless Roaming

Combining the DWL-6610APE with a Unified Wireless Switch or Controller allows you to create a wireless network that enables people to move freely around a building without losing connectivity.

DWL-6610APE Fast Seemless Roaming
DWL-6610APE Unified Wireless Controllers

Management platforms

D‑Link’s Unified Wireless Access Points can be managed using a D‑Link Wireless Controller or Unified Switch.

DWL-6610APE Dual Band Wireless

Simultaneous Dual‑Band

Supports up to 867 Mbps 2x2 MIMO for the 5Ghz band and up to 300Mbps 2x2 MIMO for the 2.4Ghz band

* Maximum wireless signal rate derived from IEEE standard 802.11ac specifications which are subject to change. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.

Related Products

Wireless Controller
Find out more
Wireless Controller
Find out more
Unified Wireless N PoE Access Point
Find out more
Unified Wireless N PoE Access Point
Find out more
Wireless Dual‑Band Outdoor Unified Access Point
Find out more
Type Hardware-managed AP
Wireless standard Wireless AC
Frequency band mode Dual-band simultaneous
Wireless speed 300 Mbps 2.4 GHz

867 Mbps 5 GHz
Antenna type 4 detachable omni-directional antennas
Antenna gain 3 dBi for 2.4 GHz

4 dBi for 5 GHz
Power-over-Ethernet Yes
Wired interface 1 x Gigabit Ethernet LAN
Indoor/outdoor Indoor
Type of housing Plastic
Plenum rated (UL-2043)
Wireless modes Access Point (AP)

WDS bridge

WDS with AP

Wireless client
Advanced features MIMO
Maximum number of SSIDs 16 per radio
Auto channel selection
WMM-PS/802.11e (U-APSD)
Wi-Fi scheduler
AP traffic load balance
L2 roaming
WEP 64/128 bit
TKIP/AES encryption
WLAN partition
SSID broadcast disable
Rogue AP detection
Station isolation
MAC address filtering
802.1X authentication
Wireless controller/unified switch managed features AP load balance

Auto-channel, auto-RF management

Captive portal

L2/L3 fast roaming

Rogue AP mitigation

View neighbour AP information

Supported D-Link Wireless Controllers/Unified Switches DWC-1000



Management platform Hardware controller: DWC/DWS Series
SNMP (v1, v2c, v3)
Configuration group sync through AP Array (up to 8 APs)

Downloads can vary across product revisions. Please select the correct hardware revision.

Version Date Type File Size
Datasheet - PDF 0.50mb Download
Version Description Date Type File Size
QIG 1.10 Revision B1 Quick Installation Guide 07/08/2018 - - Download
QIG RevB - 08/03/2017 - - Download
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Version Description Date
Firmware Firmware 17/09/2018 Download
Version Description Date
CE doc RevB1 - 03/05/2017 Download