Note: This FAQ uses the WBR-2310 as an example. Your screen may look different than the image below.
The schedule configuration option is used to manage schedule rules for various firewall and parental control features. This will allow you to set a time restriction on when firewall filters will take effect.
Step 1: Open a web browser and type the IP address of the DIR/WBR series router into the address bar (default is 192.168.0.1).
Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.
Step 3: Click on the Tools tab at the top and then click on Schedule on the left-hand side.
Step 4: Configure the following:
- Name - Give your schedule a name
- Day(s) - Check the box for All Week or select the desired time frame.
- All Day 24hrs - Enabling this will have the rule active for a period of 24hrs.
- Start and End time - If 24hrs is not checked you will need to configure your start and end time.
Step 5: Click on Save Settings to save your configuration.