How do I recover my wireless network’s password?

Method 1

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar.

picture

Step 2: The default username is Admin and the password is blank (nothing). Click Login.

picture

Step 3: Click on the Setup tab at the top then click Wireless Settings on the left side

Step 4: Click on Add Wireless Device With WPS

picture

Step 5: Choose Manual and then click Next

picture

Your wireless network information should now be visible, including your wireless password (Pre-shared Key).

picture

Method 2

Step 1: Click on the Setup tab at the top and click Wireless Settings on the left side

Step 2: Click on Manual Wireless Network Setup

picture

Step 3: Scroll down the page to "Wireless Security Mode".
This is the section where you set the wireless password (Pre-Shared Key). You can input a new password; be sure to click Save Settings at the top of the page once complete.

picture



Method 3

If you’ve registered your router with mydlink, you may log in to the mydlink web portal at www.mydlink.com to modify your router’s settings.

Step 1: Go to https://www.mydlink.com

picture

Step 2: Log in to mydlink with your existing mydlink account and password.

picture


Step 3: Choose the router from My Devices. Go to Settings.

picture

Step 4: Go to Basic Settings to modify your password. You may also click “Show password” in order to display the password on your screen.

picture

Step 5: Select Apply if you have made changes to Settings.

picture

Step 6: Select Yes if you would like to apply the new settings to the router. It will take at least 80 seconds to save the changes and reboot the router.

picture

Rank: 3

These may also help:

  • How do I change the 802.11 mode on my router? Read Answer
  • How do I change the channel of my router? Read Answer
  • How do I change the SSID/network name of my router? Read Answer
  • How do I change the Wi-Fi password on my router? Read Answer
  • How do I enable WEP encryption so my older devices can connect? Read Answer