This FAQ is for the DWL-900AP Revision C (with firmware3.07 or higher) only. Revisions A and B currently do not supportWPA.
It is recommended to configure WPA on your wireless access pointbefore your wireless network adapters.
Step 1 Log into the web configuration of theDWL-900AP by opening up a web browser and typing in the IP addressof the Access Point (192.168.0.50).
Step 2 The default username isadmin (all lower case) and the password is blank(nothing). Click OK.
Step 3 Click on the Home tab andthen click Wireless on the left hand side.
Step 4 Select WPA-PSK using theradio buttons.
Step 5 Enter a Passphrase. Thepassphrase or key is an alpha-numeric password between 8 and 63characters long. It can include symbols (!?*&_) and spaces.Make sure you enter this key exactly the same on all other wirelessclients.
Step 6 Click on the Apply buttonthen click on the Continue button to save yoursettings.
Make sure you enter the same exact WPA Passphrase on your wirelessclients.