How do I enable WPA‑PSK on my DWL‑2100 or DWL‑2200 access point?

Step 1 Log into the web-based configuration byopening up a web browser and typing in the IP address of the accesspoint (

Step 2 The default username is admin (all lowercase) and the password is blank (nothing). ClickOK.

Step 3 Click on the Advanced taband then click Encryption on the left handside.

Step 4 Click on the WPA radiobutton and then click Apply.

Step 5 Select PSK and then entera key (passphrase). The key is an alpha-numeric password between 8and 63 characters long. The password can include symbols(!?*&_) and spaces. Make sure you enter this key exactly thesame on all other wireless clients. Keep the Group KeyUpdate Interval set to 1800.

Step 6 Click on the Apply buttonto save your settings.

Note: If you are configuring your access pointfrom a wireless adapter, you will lose connectivity as soon as youclick Apply. You must enable WPA-PSK on your adapter and enter thesame exact key as you entered on your access point.

Rank: 1.5