How to configure Voice VLAN on my DGS‑1210


Description - Voice VLAN allows you to easily prioritize IP voice traffic through the switch 

Example – In our example we have created two VLANs: 

- Data VLAN - VID 20 
- Voice VLAN - VID 50 


Ports 2 and 16 are added to the data VLAN (because we have phones connected to these ports) 

Every phone has been configured with the VLAN 50 (voice VLAN)

DGS_1210_Configure_VoiceLAN

Step 1 - Enter the web configuration interface DGS-1210 

Step 2 - Please go to Configuration > 802.1Q VLAN


DGS_1210_Configure_VoiceLAN

Step 3 - Click on VLAN 1



Step 4 - Set as “Not Member” on all ports where phones are connected (in this example ports 2 and 16, then click “Apply”



Step 5 - Click “Add VID”


Step 6 - Create the “Data” VLAN, adding ports as “Untagged” where phones are connected (ports 2 and 16), then click “Apply”.



Step 7
- Create Voice VLAN (leaving all ports as Not Member), then click “Apply”



Step 8
- Please go to Configuration > Voice VLAN > Voice VLAN Settings





Step 9 - Set the Voice VLAN with the following parameters

• Voice VLAN: Enable
• VLAN ID: Enter the ID of the VLAN previously created voice (in this example VID 50) 
• Priority: Specify the priority
 
Then click “Apply”



Step 10 - In Voice VLAN Port Settings, change Auto Detection to “Enabled”, and then click “Apply”.



Step 11 - Please go to Configuration > Voice VLAN > Voice VLAN OUI Settings





Step 12 - Is this section, specify the type of device to be connected to the switch, so the switch will know which traffic to prioritize

Note: If you select a predefined mark, be sure what is in “Telephony OUI” match your phone.



If your brand is not on the list, select “User defined OUI”, then enter a description and OUI



Step 13 - Once configured, the phone will be displayed in the list

Rank: 1.5

These may also help:

  • How to Prevent ARP Spoofing - DGS-1210-Series Read Answer
  • How to Protection against malicious virus or worm attacks – DGS-1210-Series Read Answer
  • How to Setup Security with DHCP Server Screening – DGS-1210-Series Read Answer
  • How to Setup Virtual Stacking (SIM) - DGS-1500-Series Read Answer
  • How to Configure Auto Surveillance VLAN – DGS-1210 Series Read Answer
  • How to Monitor Traffic with Port Mirroring – DGS-1210-Series Read Answer