How to Access Web UI when Managed Mode ‑ DWC and DWS‑ Series

Step 1 – Set AP in Debug Mode

DWS-4026, DWS-3160, DWS-3024L:

DWC DWS How to Access Web-UI when Managed Mode
 
Click “Enable Debug” and enter a password 

DWC-1000 and DWC-2000:

DWC DWS How to Access Web-UI when Managed Mode 

DWC DWS How to Access Web-UI when Managed Mode
 
Click “Enable Debug” - ON and enter a password, confirm then click “Save”

Step 2 – Connect to the IP of the AP via Telnet (Port 23)

Step 3 – Enter the following command:

DWC DWS How to Access Web-UI when Managed Mode
 
DLINK-WLAN-AP# set web-server http-status up

Login:

DWC DWS How to Access Web-UI when Managed Mode

 
Web-UI Access:

DWC DWS How to Access Web-UI when Managed Mode



 
Rank: 1.5

These may also help:

  • DWC 1000 Configure MAC Filter Authentication Read Answer
  • How to Optimise Wireless Settings DWC-1000 - FW.4.4.x Read Answer
  • How to Add Access Point and Configuration of Profiles in the DWC-1000 Read Answer
  • How to Complete the Recovery Process for the DWC-1000? Read Answer
  • How to Configure Captive Portal with a Personal Account - DWC-1000? Read Answer
  • How to Upgrade Firmware for Access Points with DWC-1000? Read Answer
  • How to Add Access Point and Configuration of Profiles in the DWC-1000 – FW-4.4.x Read Answer
  • How to Create Multi-SSIDs and VLANs - FW.4.4.x Read Answer
  • How to create captive portal on DWC-1000 – FW.4.4.x Read Answer
  • How to Upgrade Firmware for Access Points with DWC-1000 FW.4.4.x Read Answer
  • How to Setup Captive Portal - DWC-2000 Wireless Controller Read Answer
  • How to Upgrade AP Firmware via TFTP Server - DWC-2000 Read Answer
  • How to setup Bandwidth Control on DWC for Wireless Clients Read Answer
  • How to Backup Configuration File - DWS-3024L and DWS-3024 Read Answer
  • How to set fixed channels in APs - DWS-3160 Read Answer
  • How to Configure RADIUS server – DWS-3160-Series Read Answer
  • How to Configure Multiple SSIDs and VLANs - DWS-3160-Series Read Answer