How do I configure my DIR series router to work with my DSL-300T/DSL-320T?
- Ensure that the DSL-300T/DSL-320T is set up correctly and youare able to connect to the Internet when it is attached directly toyour computer. Connect the DSL-300T/DSL-320T to theWAN port of your DIR router using the cableprovided.
- Log into the web-based configuration by typing the IP addressof the router (default: 192.168.0.1) into your web browser. Theusername is admin (all lowercase) and the passwordfield should be left blank.
Note: The address 192.168.0.1 is NOT on the Internet. Theweb-based configuration is built-in to the router.
- Click the Home tab and then theInternet button. Most users will need toselect Dynamic IP (DHCP), then click onSave Settings. The router will ask whether itshould Reboot Now or RebootLater; click on Reboot Now.
- Once the router has restarted, follow step 2 and log backin to the web configuration. Go to the Status taband select Device Info from the navigation bar onthe left. If you do not have a public IP address beneath the WANheading, click on DHCP Renew. It may take severalminutes to receive an IP address