How do I configure SharePort™ on my DIR Series Router?

Note: If using a D-Link portable router, SharePort is only compatible in Router and WIFI-Hotspot Mode

Step 1: Insert your USB Flash Drive into your Router

Step 2: Log into your router: Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter, http://dlinkrouter.local or http://192.168.0.1 into the address bar.

picture 

The default username is Admin and the password should be left blank. Click Login.

picture

Step 3: Click the Setup tab then click Storage from the menu on the left-hand side.

Step 4: Check that Enable SharePort Web Access and Allow Remote Access are checked, and then click Save Settings.

picture

Smartphone Setup

Step 5: Download the SharePort™ App from the App Store, Google Play, or the Windows Store. You can find the app using the search term “mydlink SharePort”.

picture

Step 6: Ensure your mobile device is connected to the wireless network of your SharePort supported router.

Step 7: Launch the SharePort™ app, the following screen will appear.

picture

Step 8: Tap the Settings icon.

picture

Step 9: Enter your username and password. These are the same credentials used to access your router’s web-based configuration interface.
Note: By default the username is set to “Admin” with no password.

Step 10: Change the port if required (by default it is configured at port 8181 within the router configuration)
Note: If accessing content remotely over the Internet, enter the IP or domain address of your router; if accessing locally, this will be filled in automatically.

picture

SharePort is successfully configured and your USB media should now be accessible.

picture

Rank: 3

These may also help:

  • How do I configure SharePort Web Access on my router? Read Answer
  • How do I access the USB media that is connected to my router? Read Answer