How do I upgrade the firmware on my DCS‑935L?

Requirements:

• iPad  with mydlink Home App
• PC with Securicam Network Search Tool

ftp://ftp.dlink.eu/Products/dcs/@general/DCS_Setup-Wizard-SE.zip

Step 1 – You will need to locate the IP of the camera. There are two methods

• Using mydlink Home App – Tap on this icon:

ES_DCS_935L_How_to_upgrade_firmware1

• Tap “Information”

• Here you should see the IP of the camera – In our example: 192.168.1.195

D-Link

D-Link

D-Link

• Using Securicam Network Tool – Click “Search”

D-Link

Step 2 – Open a web browser, we recommend Internet Explorer and type the IP of the DSC-935L

D-Link
 
Step 3 – You will be prompted for the “Username” and “Password”

D-Link
 
Click “OK

Step 4 – Once in the GUI of the DCS-935L, go to MAINTENANCE > Firmware Upgrade

D-Link
 
Step 5 – Click on “Browse” to search for the firmware then click “Upload”

D-Link

Step 6 –
You must not interrupt this process at any time to avoid damaging the camera. Once the process has completed, you should see the following screen and firmware has been upgraded and completed with success

D-Link
 

 

Rank: 1.5

These may also help:

  • How do I see information about my DCS-935L using my Android device? Read Answer
  • How do I configure sound detection on my DCS-935L using my Android device? Read Answer
  • How do I Setup DCS-935L with an iPad? Read Answer
  • How do I setup my DCS-935L on my Android device? Read Answer
  • How to configure motion detection in DCS-935L using an Android device Read Answer