How do I Setup DCS‑935L with an iPad?

Requirements:

• iPad
• Quick Install Card
• QR Code Reader

Step 1 – Insert power cable into the DCS-935L, wait until a solid “Green” LED is present then insert a pin into the reset button then press and hold the reset button for 10 seconds until “Power” LED shows “Red”

Step 2 – Open the iPad and go to App Store and download the mydlink Home App

DCS_935L_How_to_setup_with_an_iPad1 

Step 3 – Once installed, tap the on the mydlink Home icon on your iPad and enter your mydlink account details to login

D-Link
 
Tap “Done” then “Sign in”

Step 4 – Tap on the “+” to add new device
 
D-Link

Step 5 – You will be presented with the “QR Code Setup”

D-Link
 
Here you have 2 options:

1. Tap “Next” to scan the QR Code
2. Tap “Skip QR Code”

Step 5a – Tap “Next” to scan the QR Code

Pass the “QR Code” located on the reverse side of the “Quick Install Card” in front of the QR Code Reader

D-Link
 
Then go to Step 6

Step 5b – Tap Skip QR Code then Tap Camera and finally tap DCS-935L

D-Link

D-Link 

Step 6 – Ensure the DCS-935L is plugged into a power socket

D-Link
 
Tap “Next”

Step 7 – Ensure there is a flashing “Green” LED

D-Link
 
Tap “Next”

Step 8 – Here you will be presented with 2 options:

1. Configure Manually – Tap “Manual” and go to Step 8a
2. Configure with WPS (if your Router or Wireless device supports this) – Tap “Next” and go to Step 8b

D-Link

Step 8a – Tap “Manual”

D-Link
 
Don’t tap next, go to Step 9

Step 8b – If your router supports WPS, press the button marked D-Linkor WPS and the same button on the DCS-935L then tap “Next”

D-Link

D-Link 

When the LED blinks “Green” then tap “Next”. When the LED is solid green, tap “Green” then go to Step 11

If you get the following message. Please check connection and select either of the following: Tap to “Restart hardware setup” to go back to Step 5 or tap “Search again” to go back to Step 11

D-Link

Step 9 – Tap “Home” button on the iPad > Settings > Wi-Fi

Then connect to the Wi-Fi of the DCS-935L-XXXX.

In our example it was “DCS-935L-1496”, enter the Wi-F
i password (located on reverse side of the “Quick Install Card” and tap “Join”

D-Link

D-Link

Step 10 – Once connected to the Wi-Fi of the DCS-935L, return to the mydlink Home

D-Link
 
Tap “Next”

Step 11 – The wizard will now be “Searching for your device…”

D-Link

Step 12 – Tap to select the device then go to Step 17

D-Link

D-Link

Step 13 – Tap to choose the Wi-Fi network you wish to connect to

D-Link

Step 14 – Tap “Home” button on the iPad > Settings > Wi-Fi

Then connect to the Wi-Fi of what was selected in Step 13

In our example it was “dlink1”

D-Link

D-Link
 

Tap “Next”

Step 15 – The wizard will now be “Searching for your device…”

D-Link

Step 16 – Tap to select device

D-Link

Step 17 – Select the “Time Zone” by tapping

D-Link
 
Tap “Next”

Step 18 – Choose a password for the DCS-935L and also a name (In our example we have given “admin” as the password and given the name as default)

D-Link
 
Tap “Done”

Step 19 – You will now see the camera is now added to “My Devices”

D-Link
 

Rank: 1.5

These may also help:

  • How do I upgrade the firmware on my DCS-935L? Read Answer
  • How do I see information about my DCS-935L using my Android device? Read Answer
  • How do I configure sound detection on my DCS-935L using my Android device? Read Answer
  • How do I setup my DCS-935L on my Android device? Read Answer
  • How to configure motion detection in DCS-935L using an Android device Read Answer