How do I physically plug in the DSL-604 to my network?

Before calling tech-support, do/verify the following:

  1. Plug your splitter directly into the master telephonesocket.
  2. Plug ADSL cable into the ADSL port on the splitter.
  3. Plug other end of ADSL cable into the ADSL port on yourDSL-604 .
  4. Plug one end of the ethernet cable provided into one of theLAN ports of DSL-604 . (1, 2, 3 or 4)
  5. Plug other end of ethernet cable provided into the ethernetcard on your computer or laptop.
  6. Plug power adapter into electrical socket on wall.
  7. Plug other end of power cord into the power slot of yourDSL-604 .
  8. Verify that the Power, ADSL, and LAN (1, 2, 3, or 4) lightsare on. If one of these is not lit up, there could be an issue withsome of your hardware. It may be advised you call tech support atthis point.
Rank: 1.5