How do I create schedules on my DIR series router?

Note: This FAQ uses the WBR-2310 as an example. Your screen may look different than the image below.

The schedule configuration option is used to manage schedule rules for various firewall and parental control features. This will allow you to set a time restriction on when firewall filters will take effect.

Step 1: Open a web browser and type the IP address of the DIR/WBR series router into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Tools tab at the top and then click on Schedule on the left-hand side.

 

 

Step 4: Configure the following:

  • Name - Give your schedule a name

  • Day(s) - Check the box for All Week or select the desired time frame.

  • All Day 24hrs - Enabling this will have the rule active for a period of 24hrs.

  • Start and End time - If 24hrs is not checked you will need to configure your start and end time.

Step 5: Click on Save Settings to save your configuration.

Rank: 3

These may also help:

  • How do I log into my router? Read Answer
  • How do I view which websites have visited through my mydlink router? Read Answer
  • How do I change my Cloud Router's wireless settings? Read Answer
  • How do I change my routers IP Address? Read Answer
  • How do I change the 802.11 Mode on my DIR series router? Read Answer
  • How do I change the login password to my DIR router? Read Answer
  • How do I configure DHCP reservation on my DIR series router? Read Answer
  • How do I configure Dynamic DNS on my DIR Series router? Read Answer
  • How do I configure Email Notification on my DIR series router? Read Answer
  • How do I configure global QoS on my DIR series router? Read Answer
  • How do I configure INBOUND FILTERS on my DIR Series Router? Read Answer
  • How do I configure MAC filtering on my DIR/WBR series router? Read Answer
  • How do I configure SharePort Web Access on my DIR Series Router? Read Answer
  • How do I configure the QOS rules on my DIR Series Router? Read Answer
  • How do I configure WISH on my DIR Series router to enhance my wireless network? Read Answer
  • How do I disable the Wireless on my DIR Series Router? Read Answer
  • How do I disable UPnP on my DIR Series Router? Read Answer
  • How do I enable remote management on my DIR series router? Read Answer
  • How do I open/change NAT settings for my Playstation 3 using my DIR series router? Read Answer
  • How do I open ports on my DIR Series router? Read Answer
  • How do I remove/block users from my wireless network on my mydlink router? Read Answer
  • How do I reset my DIR Series router to factory default from the web-based configuration? Read Answer
  • How do I secure the wireless signal of my DIR Series Router? Read Answer
  • How do I setup Website Filtering on my DIR series router? Read Answer
  • How do I view which websites have visited through my mydlink router? Read Answer
  • How to hard reset my router to default settings? Read Answer
  • I have forgotten my wireless password, how do I recover it? Read Answer
  • What is the button on the side of my router used for? Read Answer
  • What can I do if the router always shows "Loading" on mydlink portal? Read Answer