How do I mount my DCS-5222L to the wall or ceiling?

Note: It is suggested that you configure the camera before you mount the camera.

Note: On the bottom of the DCS-5222L, please remove the 3 rubber pads covering the mounting holes.

Step 1: Attach the mounting plate to the bottom of the DCS-5222L. Turn the camera clockwise (to the right) until it stops. (The plate should be attached similar to the below image)

Step 2: Use 3 screws to attach the metal mounting bracket to the wall/ceiling

Step 3: Push the camera up onto the metal bracket and rotate the base of the camera to lock it into the bracket

Rank: 1.5