How do I manually upgrade the firmware on my camera?

Note: All firmware upgrades should be done over a WIRED connection. If your camera is currently configured for wireless, plug it directly into your router before proceeding. Do not turn your camera off during the firmware upgrade process – doing so could permanently damage the unit.

Step 1:  Download the latest firmware file for your device from https://eu.mydlink.com/support

Step 2: Open a web browser and enter the IP address of your camera in the address bar (default is 192.168.0.20). If you do not know the IP address of your camera, please refer to the section entitled “How do I find the IP address of my DCS-2330L and access the web-based user interface?” in this FAQ. Press Enter.

Step 3: The User Name for the administrator account is admin. Enter your administrator password in the Password field. If you have not changed this from the default, leave this field blank. Click OK.

picture

Step 4: Click the Maintenance tab at the top of the page and then click Firmware Upgrade from the menu on the left-hand side of the page.

picture

Step 5: Click on Browse and select the downloaded firmware file. Once the firmware file appears in the File Path field, click Upload to commence the firmware upgrade process.

Rank: 3

These may also help:

  • How do I access my mydlink camera remotely? Read Answer
  • How do I change the LAN IP address of my camera? Read Answer
  • How do I configure motion detection on my camera? Read Answer
  • How do I configure the audio settings (microphone) on my DCS-2330L? Read Answer
  • How do I find the IP address of my DCS-2330L and access the web-based user interface? Read Answer
  • How do I mount my camera to the wall or ceiling? Read Answer
  • How do I set an administrator (admin) password on my DCS-2330L? Read Answer
  • How do I set up and install my DCS-2330L? Read Answer
  • What if I forget the Admin password for my camera? Read Answer
  • Which types of motion detection are available on my IP camera? Read Answer