Wireless AC2200 Wave 2 Tri-Band Unified Access Point


  • Product Status (Revision A): Live
  • 802.11ac Wave 2, Tri-Band, up to 2.2 Gbps*
  • 2 Internal Omnidirectional Antennas
  • Up to 64 dynamic VLANs per access point
  • 802.11k Fast Roaming1, MU-MIMO and QoS with WMM
  • Link Aggregation2
  • Limited Lifetime Warranty

Download the datasheet.

Where to buy
AC2200 Wave 2 Wi-Fi

802.11ac Wave 2 wireless with combined speeds of up to 2.2 Gbps*

Tri-Band Wi-Fi

Improved throughput and coverage with three bands. Reduces co-channel interference, bringing more reliability in high-density areas.

802.11k Fast Roaming<sup>1</sup>

Allows wireless clients to move freely, jumping from AP to AP without losing connectivity.

Automatic Radio Frequency (RF) Management

Greatly reduces RF interference and enables denser AP deployments.

Centrally Managed

Used as a standalone wireless access point, or managed centrally via a D-Link Wireless Controller.

Limited Lifetime Warranty

Register and enjoy Limited Lifetime Warranty support from one of the global leaders in the industry.

Faster Business with Wave 2 Tri-Band Wi-Fi

Advanced Wireless Features

Upgrade to Tri-Band WiFi

The DWL-7620AP features one 2.4 GHz and two 5 GHz wireless bands for the growing number of devices connecting to a single access point.

Allows older 802.11b/g/n devices to connect to the 2.4 GHz while two 5 GHz bands can be dedicated to newer, faster wireless AC devices to enjoy seamless bandwidth-intensive applications like HD video conferencing, VoIP and file collaboration.

Band steering technology efficiently load balances the clients and traffic between the three wireless bands to ensure your wireless clients have a superior user experience even in high-density environments.

Greater Speed and Connectivity

Combined wireless speeds of up to 2,200 Mbps* over 3 wireless bands for improved business network speeds. 

Wired link aggregation2 allows two Gigabit Ethernet ports to be linked together and act as a single port doubling the access point’s available bandwidth and maximising the overall throughput.

MU-MIMO Efficiency

With support for MU-MIMO (Multi-User Multiple Input Multiple Output), the DWL-7620AP simultaneously communicates with multiple clients using multiple antennas. This allows the access point to utilise the spectrum more efficiently and significantly increase the network capacity. The 2 x 2 MU-MIMO takes full advantage of all streams to serve more wireless clients, dramatically improving wireless performance.

Flexible Deployment

Effective Management

Centrally Managed

When working in conjunction with D-Link Unified Wireless Controllers (DWC-1000, and DWC-2000), multiple units of DWL-7620AP can be centrally managed. This allows for a large number of access points to be deployed and managed easily and efficiently.

Automatic Radio Frequency (RF) Management

When the DWL-7620AP senses a neighbouring AP nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference and allows access points to be deployed more densely. 

To further minimise interference, when a nearby AP is on the same channel, the DWL-7620AP will automatically lower its transmission power. If the nearby access point fails, then this access point will increase its transmission power to expand coverage.

We're here to help.

Over 35 years in the networking industry

Innovative end‑to‑end solution experts for small businesses to large corporations around the world.

Talking to us is easy

Skilled local support in 16 countries. Our support teams are ready to help you.

D-Link Limited Lifetime warranty

The quality and reliability of D-Link products enable us to provide an industry-leading Limited Lifetime Warranty with every registration.

Hardware-managed AP
Wireless standard
Wireless AC Wave 2
Frequency band mode
Tri-band simultaneous
Wireless speed
2 x 867 Mbps 5 GHz

400 Mbps 2.4 GHz
Antenna type
Embedded omni-directional antennas
Antenna gain
3 dBi for 2.4 GHz

4 dBi for 5 GHz
Wired interface
2 x Gigabit Ethernet LAN
Console port
Type of housing
Plenum rated (UL-2043)
Wireless modes
Access Point (AP)
Advanced features
Fast Roaming


Maximum number of SSIDs
16 per radio
Auto channel selection
WMM-PS/802.11e (U-APSD)
Wi-Fi scheduler
AP traffic load balance
L2 roaming
TKIP/AES encryption
WLAN partition
SSID broadcast disable
Rogue AP detection
Station isolation
MAC address filtering
802.1X authentication
Controller managed features
AP load balance

Auto-channel, auto-RF management

Captive portal

Rogue AP mitigation

View neighbour AP information

Supported D-Link Wireless Controllers/Unified Switches

802.1D STP
Management platform
Hardware controller: DWC Series
SNMP (v1, v2c, v3)

*Maximum wireless signal rate derived from IEEE standard 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
1. This feature is available when Unified AP is used in conjunction with D-Link’s line of Unified Wireless Controllers.
2. Support static Link Aggregation (LAG).


Version Date Type File Size
Datasheet EN - PDF 0.46mb Download
Version Description Date Type File Size
Manual 6.61 Revision A1 Product Manual 11. 09. 2018 - - Download
Version Description Date Type File Size
QIG 1.03 RevisionA1 Quick Installation Guide 5. 11. 2019 - - Download
QIG 1.02 RevisionA1 Quick Installation Guide 15. 05. 2018 - - Download
QIG 1.01 RevisionA1 Quick Installation Guide 10. 04. 2018 - - Download
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Version Description Date Type
FW RevA1 Firmware 18. 11. 2020 - Download
FW Revision A1 Firmware 7. 02. 2020 - Download
FW Revision A1 Firmware 14. 05. 2019 - Download
FW Revision A1 Firmware 18. 04. 2018 - Download
Version Description Date
CE doc UKCA 1.01 RevA1 CE document 19. 07. 2022 Download
CE doc UKCA 1.00 RevA1 CE document 2. 07. 2021 Download
CE doc 4.00 RevA1 CE document 19. 05. 2020 Download
CE doc 3.00 RevA1 CE document 30. 12. 2019 Download
CE doc 2.00 RevA1 CE document 24. 07. 2019 Download
CE doc 1.00 Revision A1 CE document 17. 05. 2018 Download