Gigabit Layer 3 Stackable Managed Switches
DGS‑3130 Series
- Product Status (Revision A): Live
- Unified software image with powerful L2 and L3 features
- 6x 10 Gigabit ports
- 6kV Surge Protection for Gigabit Ethernet ports
- Power over Ethernet (PoE) options, up to 740W with RPS
- D-Link Safeguard Engine
- Limited Lifetime Warranty with registration
Where to buy

2 x 10GBASE-T, 4x SFP+ 10G ports
Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.

Physical Stacking
Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.

Layer 2 Features
Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.

Layer 3 Features
Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP.

RIPv1/v2/ng
Determines the best route to a destination in the network.

Static Routing
Route Layer 3 traffic between switches, even if they're segmented in VLANs.

Industry Standard CLI
Supports a full industry standard Command-Line Interface for system management.

Dual Image
Risk-free configuration testing.
Greater port density. Powerful Layer 3 features.
Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments.

World‑class reliability.
Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.
6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.


Comprehensive security.
Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.
IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.
Easy Access Control policies.
They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.
Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Versatile traffic management.
A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.
PoE+ with budgets up to 740W2
The 30PS and 54PS models have 370W PoE power budgets. Or utilise a total of 740W when adding a redundant power supply.
The 30PS and 54PS models have 370W PoE power budgets. Or utilise a total of 740W when adding a redundant power supply.


Free Next‑Business‑Day Service
Enjoy our free Next Business Day service, as standard with D-Link Business products, to replace faulty equipment quickly.
Our rapid-response technical support is designed to ensure businesses get the best support for their unique environment. Our extended warranty and enhanced service packages increases the lengths of warranties and further minimises downtime.
DGS‑3130 Switch Series

· 24 x 10/100/1000BASE-T
· 2 x 10GBASE-T
· 4 x 10G SFP+

· 24 x SFP
· 2 x 10GBASE-T
· 4 x 10G SFP+

· 24 x 10/100/1000BASE-T PoE
· 2 x 10GBASE-T
· 4 x 10G SFP+

· 48 x 10/100/1000BASE-T
· 2 x 10GBASE-T
· 4 x 10G SFP+

· 48 x SFP
· 2 x 10GBASE-T
· 4 x 10G SFP+

· 48 x 10/100/1000BASE-T PoE
· 2 x 10GBASE-T
· 4 x 10G SFP+
We're here to help

Over 30 years in the networking industry
Innovative end‑to‑end solution experts for small businesses to large corporations around the world.

Talking to us is easy
Skilled local support in 16 countries. Our support teams are ready to help you.

D‑Link Limited Lifetime warranty
The quality and reliability of D‑Link products enable us to provide an industry‑leading Limited Lifetime Warranty with every registration.
Related Products





1 When stacking the DGS-3130-30TS/30S/30PS models, the stacking cost is 1 per unit so the maximum units per stack is 9. When stacking the DGS-3130-54TS/54S/54PS models, the stacking cost is 2 per unit so the maximum units per stack is 6. When stacking different models in the same stack, switches can be stacked up to a maximum of 12 stacking cost per stack. For example: 2 x DGS-3130-30TS (2 stacking cost) + 2 x DGS-3130-30S (2 stacking cost) + 4 x DGS-3130-54TS (8 stacking cost) consumes a total stacking cost of 12 (2+2+8).
Specs
Type
|
Managed |
---|---|
Number of ports
|
16 to 30 ports
48 to 54 ports |
Layer
|
Layer 2+
Layer 3 |
Main type of ports
|
1000BASE-T Gigabit Ethernet
SFP |
Type of uplink ports
|
10GBASE-T
10GbE SFP+ |
Switching capacity
|
168 Gbps
216 Gbps |
PoE options
|
802.3af
802.3at |
Number of PoE ports
|
24
48 |
PoE power budget
|
See datasheet
See datasheet |
802.3az Energy-Efficient Ethernet support
|
Supported
|
Form Factor
|
Rackmountable |
Physical stacking
|
Up to 20 Gbps bidirectional bandwidth
Up to 9 devices |
Virtual stacking (up to 32 devices)
|
Supported
|
Jumbo frame
|
Supported
|
Cable diagnostics
|
Supported
|
MAC address
|
16K |
Spanning Tree Protocol
|
802.1D STP
802.1s MSTP 802.1w RSTP |
Ethernet ring protection switching (ERPS)
|
Supported
|
Link aggregation
|
802.3ad |
VLAN group (max static)
|
4K |
VLAN type
|
GVRP
MAC-based Port-based Protocol-based |
Advanced VLAN
|
Asymmetric VLAN
ISM VLAN Super VLAN Voice VLAN |
IP interfaces
|
16 |
Static route for IPv4/IPv6
|
IPv4 - 1K
IPv6 - 512 |
RIP v1/v2
|
Supported
|
RIPng
|
Supported
|
Number of QoS queues per port
|
8 |
CoS based on contents
|
Supported
|
Bandwidth control
|
8 Kbps minimum granularity |
Three colour marker
|
8 Kbps minimum granularity |
ACL type
|
Egress
Ingress VLAN-based |
ACL based on packet contents
|
Supported
|
Time-based ACL
|
Supported
|
Encryption protocol supported
|
SSH
SSL (v1/v2/v3) |
IP-MAC-port binding (IMPB) / Smart Binding
|
Supported
|
ARP spoofing
|
Supported
|
BPDU attack protection
|
Supported
|
802.1X access control
|
Supported
|
Microsoft NAP support
|
Supported
|
RADIUS/TACACS+ authentication
|
Supported
|
SNMP (v1/v2c/v3)
|
Supported
|
RMON v1/v2
|
Supported
|
sFlow
|
Supported
|
LLDP
|
Supported
|
ICMPv6
|
Supported
|
802.3ah
|
Supported
|
FAQ
- What is the default IP address of my D Link Managed Switch ? Read Answer
- DGS-3130 - Stacking Bandwidth Read Answer
- What is the difference between Stacking Lite and Original D-Link Stacking? Read Answer
- What is the cost of a switch in the new D-Link stacking Lite Technology ? Read Answer
Version | Date | Type | File Size | |
---|---|---|---|---|
Datasheet EN | - | 0.41mb | Download |
Version | Description | Date | Type | File Size | |
---|---|---|---|---|---|
Hardware install 1.10 RevA1 | Hardware Install Guide | 15.6.2020 | - | - | Download |
CLI and WEB Ref. Guide 1.10 RevA1 | Product Manual | 6.2.2020 | - | - | Download |
CLI Manual 1.00 Revision A1 | CLI Manual | 6.7.2018 | - | - | Download |
WebGUI 1.00 Revision A1 | WebGUI Reference Guide | 6.7.2018 | - | - | Download |
Version | Description | Date | Type | File Size | |
---|---|---|---|---|---|
QIG HW install 1.00 Revision A1 | Hardware Installation Guide | 6.7.2018 | - | - | Download |
Version | Description | Date | |
---|---|---|---|
MiB 3130-30TS 1.10B057 RevA1 | MiB file | 31.1.2020 | Download |
FW 1.10B057 RevA1 | Firmware | 22.1.2020 | Download |
MiB 1.10B057 RevA1 | MiB file | 22.1.2020 | Download |
FW 3131-30TS 1.10.057 RevA1 | Firmware | 22.1.2020 | Download |
FW 1.10B032 RevA1 | Firmware | 19.9.2019 | Download |
MiB 1.10B032 RevA1 | MiB file | 19.9.2019 | Download |
FW 1.01B027 Revision A1 | Firmware | 20.9.2018 | Download |
FW 1.01B026 Revision A1 | Firmware | 7.8.2018 | Download |
MiB 1.01B026 Revision A1 | MiB file | 7.8.2018 | Download |
Version | Description | Date | |
---|---|---|---|
CE doc 3130 1.30 RevA1 | CE document | 2.7.2020 | Download |
CE doc 3130-30PS 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-30S 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-30TS 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-54PS 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-54S 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-54TS 1.20 RevA1 | CE document | 24.7.2019 | Download |
CE doc 3130-30PS 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-30S 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-30TS 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-54PS 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-54S 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-54TS 1.10 RevA1 | CE document | 20.12.2018 | Download |
CE doc 3130-30PS RevA1 | CE document | 22.6.2018 | Download |
CE doc 3130-30S RevA1 | CE document | 22.6.2018 | Download |
CE doc 3130-30TS RevA1 | CE document | 22.6.2018 | Download |
CE doc 3130-54PS RevA1 | CE document | 22.6.2018 | Download |
CE doc 3130-54S RevA1 | CE document | 22.6.2018 | Download |
CE doc 3130-54TS RevA1 | CE document | 22.6.2018 | Download |