Dualband PoE 11N Accesspoint

DAP‑2590

  • Product Status: Phased Out

The DAP-2590 is second generation Dual Band Wireless N indoor access point designed specifically for businesses. It’s varied and comprehensive management capabilities ensures that the DAP-2590 meets the needs of almost any business.


Download the datasheet.

List Retailers

Compatibility and performance

With adjustable antennas, the DAP-2590 delivers 300Mbps per band performance

Broadcast 16 independent SSIDs simultaneously

Supports up to 16 SSIDs, 8 per Band, including station isolation

Performance and Compatibility

The DAP-2590 is a second generation Dual-Band Wireless N indoor access point designed specifically for businesses. It’s varied and comprehensive management capabilities ensures that the DAP-2590 meets the needs of almost any business.

Simultaneous Dual-Band Wireless

Supports up to 300Mbps for the 5Ghz band and up to 300Mbps for the 2.4Ghz band

Smart Design

The DAP-2590 has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

Type Software Managed AP
Wireless standard Wireless N
Frequency band mode Dual-band selectable
Antenna type 3 detachable omni-directional antennas
Antenna gain 4 dBi for 2.4 GHz

6 dBi for 5 GHz
Power-over-Ethernet Yes
Wired interface 1 x Gigabit Ethernet LAN
Indoor/outdoor Indoor
Type of housing Metal
Plenum rated (UL-2043)
Supported
Wireless modes Access Point (AP)

WDS bridge

WDS with AP

Wireless client
Advanced features MIMO
Maximum number of SSIDs 8
Auto channel selection
Supported
WMM-PS/802.11e (U-APSD)
Supported
Wi-Fi scheduler
Supported
AP traffic load balance
Supported
L2 roaming
Supported
WEP 64/128 bit
Supported
WPA/WPA2-Personal/Enterprise
Supported
TKIP/AES encryption
Supported
WPA_WPA2_PSK over WDS
Supported
WLAN partition
Supported
SSID broadcast disable
Supported
Rogue AP detection
Supported
Station isolation
Supported
MAC address filtering
Supported
802.1X authentication
Supported
DHCP server
Supported
802.1D STP
Supported
IGMP snooping
Supported
ARP spoofing
Supported
SNTP
Supported
WEB
Supported
SNMP (v1, v2c, v3)
Supported
CLI
Supported
Telnet
Supported
SSH
Supported
Syslog
Supported
Central management (through AP Manager II and/or D-View Wireless Control Module)
Supported
Configuration group sync through AP Array (up to 8 APs)
Supported

FAQ

  • What is the advantage of using WPA over WEP security? Read Answer
Version Date Type File Size
Datasheet (English) - PDF 4.47mb Download
Version Description Date Type File Size
Manual (English)

Manual (English)

- PDF 3.69mb Download
AP Manager II - User AP Manager II - User Manual (English) - PDF 5.96mb Download
Version Description Date Type File Size
Quick Installation Guide (Multilingual) - PDF 1.91mb Download
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
 
http://tsd.dlink.com.tw/GPL.asp
 
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Version Description Date
Firmware 1.25rc056

Firmware

2013-05-15 Download
Firmware 1.20 rc039 Firmware 2012-07-26 Download
Version Description Date
MIB file 1.15 rc012 MIB file 2011-08-15 Download
AP Manager II v 1.13 1.13 r38

AP Manager II v 1.13

Release notes enclosed.

2011-01-06 Download
Version Description Date
CE doc 1.00 Revision A2 CE document 2014-03-12 Download