How do I configure WPA-PSK on my DWL-G810?
To use WPA-PSK, please upgrade to firmware version 2.13 orhigher.
Step 1 Log into the web configuration of theDWL-G810 by opening up a web browser and typing in the IP addressof the DWL-G810 (default is 192.168.0.30). PressEnter.
Step 2 The default username isadmin (all lower case) and the password is blank(nothing). Click OK.
Step 3 Click the Wirelesstab.
Step 4 Next to Authentication, select theWPA-PSK radio button.
Step 5 Enter a Passphrase and re-type itin the space below. The passphrase or key is an alpha-numericpassword between 8 and 63 characters long. It can include symbols(!?*&_) and spaces.
Step 6 Click Apply then clickContinue to save the changes.
Make sure you enter the same exact WPA-PSK Passphrase on yourwireless clients.