Wireless N 5GHz PoE Outdoor Access Point with PoE Pass‑Through


  • Product Status: Phased Out

The DAP-3410 is a Wireless N 5GHz Outdoor Access Point.  It can be deployed to expand the coverage and signal strength of an existing wireless network or alternatively used as a low cost alternative to connect networks that are not joined physically by an Ethernet or fibre cable.  Within PoE integrated as standard, the DAP-3410 is built to withstand harsh outdoor deployments.

Download de datasheet.

Alle Verkooppunten

The DAP-3410 is a Wireless N Outdoor Access Point with PoE Pass-Through ideal for expanding wireless coverage or increasing signal strength of any wireless network. Built to withstand harsh environments, the DAP-3410 excels in connecting separate networks that are not joined by a physical cable.

Simplified outdoor connectivity

Low cost Outdoor Access Point, with high power radio design the DAP-3410 is ideal for providing wireless connectivity between two locations.

Broadcast on 8 SSIDs Simultaneously

Supports up to 8 SSIDs per Band that can logically divide the access point into several virtual access points all within a single hardware platform.

Attractive Design

Featuring a clean unobtrusive design, the DAP-3410 can be mounted easily onto any wall or pole. Designed with a PoE pass-through port, the DAP-3410 can also be used to provide power to other devices such as an external camera for added security.

Wireless N mbps Range Single band outdoor

Product Highlights

Built to withstand harsh outdoor environments and be waterproof to the IPX6 standard

PoE powered with PoE pass-through to allow for flexible installation, as well as supply additional power and network connectivity to other PoE powered devices, such as a network camera

With 7 operational modes including access points, WDS, WDS with AP, wireless client, wireless repeater, WISP client router or WISP repeater, the DAP-3410 meets the needs of any situation.

Secure wireless connectivity using WPA/WPA2 data encryption and MAC address filtering wireless access can be controlled

5Ghz Single-Band Wireless

With a high power radio design and built-in high gain sector antenna,
the DAP-3410 supports up to 300Mbps throughput for the 5Ghz band

Functions & Features


For Business-Class Environment
  • 5 GHz 802.11a/n connectivity for increased network capacity
  • High power radio design1
  • Built-in high gain sector antenna
  • Waterproof IPX6 standard2
High Performance Connectivity
  • Up to 300 Mbps3
  • Two 10/100 Ethernet ports
Trusted Security Features
  • WPA/WPA2-Personal/Enterprise
  • 64/128 bit WEP encryption
  • 802.1x
  • MAC address filter
  • Client isolation
  • User limit
Convenient Installation
  • Proprietary PoE design
  • PoE pass-through4
  • Wall/pole mount included

Technical Specifications


Device Interfaces
  • 802.11a/n wireless
  • Reset button
  • Two 10/100 Ethernet port (one supports PoE)
  • Grounding wire connector6
  • Power
  • LAN
  • Wireless Signal Strength7
  • 15 dBi Sector Antenna
Wireless Frequency
  • 5 GHz
  • IEEE 802.11 a/n
  • IEEE 802.3u
  • IEEE 802.3

Operation Mode
  • AP
  • WDS5
  • WDS with AP5
  • Wireless Client
  • Repeater
  • WISP Repeater
  • WISP Client Router
Network Management
  • Web Browser Interface
  • HTTP – Secure HTTP (HTTPS)
  • SNMP v1, v2c and v3
  • WPA2-Personal/Enterprise
  • WPA-Personal/Enterprise
  • WEP 64/128 bit Encryption
  • 802.1X
  • Support for up to 8 SSIDs/VLANs

  • 48 x 96 x 165 mm (1.88 x 3.77 x 6.49 inches)
  • 350 grams (0.77 lbs)
  • Input: 48 V 0.5 A
  • Operating: -20 to 60 °C (-4 to 140 °F)
  • Storage: -20 to 85 °C (-4 to 185 °F)
  • Operating: 0% to 90% non-condensing
  • Storage: 5% to 95% non-condensing
ESD Protection
  • 15 kV
  • CE
  • FCC

1 Maximum power setting will vary according to individual country regulations.
2 IPX6 standard means the device is protected from low pressure jets of water from all directions - limited ingress permitted. It is recommended to place this device under a roof, shelter or in weather-proof box when deployed in severe weather environments.
3 Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
4 Provides a secondary Ethernet port with POE output for supported D-Link IP cameras. The supported cameras include D-Link DCS-3716, DCS-6113, and DCS-7110.
5 WDS mode only works with other DAP-3410 access points
6 Grounding wire is not includes in package content and we suggest using 16 -18 AWG grounding wire for normal lightening and electricity current.
7 LED Signal Strength Indication only supports in Wireless Client, Repeater, WDS and WISP modes.
8 Although compatible with  DD-WRT, please be advised that if DD-WRT is used this will void your warranty and D-Link will not accept responsibility or support any products that may  adversely be affected as a result of using  DD-WRT.


  • How to Setup AP Mode with Wireless Client and PoE Camera – DAP-3410 Lees antwoord
Versie Datum Type Bestandsgrootte
Datasheet - PDF 0.50mb Download
Versie Beschrijving Datum Type Bestandsgrootte
Product manual Product manual 15-10-2014 PDF 3.67mb Download
Versie Beschrijving Datum Type Bestandsgrootte
1.10 Quick installation guide 15-10-2014 PDF 0.53mb Download
Dit D-Link product bevat software code welke ontwikkeld is door derden, waaronder software code die valt onder de GNU General Public License ("GPL") of GNU Lesser General Public License ("LGPL"). Indien van toepassing: de voorwaarden van de GPL en LGPL en informatie over het verkrijgen van toegang tot de GPL-code en LGPL-code die in dit product zijn gebruikt, zijn hier voor u beschikbaar:
De GPL-code en LGPL-code die gebruikt is in dit product wordt gedistribueerd ZONDER ENIGE GARANTIE en is onderworpen aan de auteursrechten van een of meer auteurs. Voor meer informatie, zie de GPL-code en de LGPL-code voor dit product en de voorwaarden van de GPL en LGPL.
Versie Beschrijving Datum
Firmware 1.10rc17 Firmware 15-10-2014 Download
Versie Beschrijving Datum
CE declaration CE declaration 15-10-2014 Download