Gigabit Layer 3 Stackable Managed Switches

DGS‑3130 Series

  • Product Status (Revision A): Live
  • Unified software image with powerful L2 and L3 features
  • 6x 10 Gigabit ports
  • 6kV Surge Protection for Gigabit Ethernet ports
  • Power over Ethernet (PoE) options, up to 740W with RPS
  • D-Link Safeguard Engine
  • Limited Lifetime Warranty with registration

Download the datasheet.

List Retailers
10G Ports
2 x 10GBASE-T, 4x SFP+ 10G ports

Connect to areas of your network at 10G speeds, and reach even further distances with fibre optic cabling.

Stacking
Physical Stacking

Up to 9 units per stack1, with a maximum of 324 ports, and up to 80GB of bandwidth.

Layer 2
Layer 2 Features

Such as flow control, link aggregation, Ethernet Ring Protection Switching (ERPS), Spanning Tree Protocols, Loopback Detection, IGMP/MLD Snooping.

Layer 3
Layer 3 Features

Including up to 16 IP Interfaces, IGMP Filtering, Neighbor Discovery Protocol (ND), ARP Proxy, VRRP.

RIP
RIPv1/v2/ng

Determines the best route to a destination in the network.

Static Routing
Static Routing

Route Layer 3 traffic between switches, even if they're segmented in VLANs.

CLI
Industry Standard CLI

Supports a full industry standard Command-Line Interface for system management.

Dual Image
Dual Image

Risk-free configuration testing.

DGS-3130 Gigabit Layer 3 Stackable Managed Switches

Greater port density. Powerful Layer 3 features.

Designed for small to medium-sized business networks, the unified software incorporates Layer 2 and Layer 3 features, with 10-Gigabit ports, greater port density thanks to physical stacking, all of which enables the DGS-3130 Series to be deployed in a variety of environments and topologies, including Metro Ethernet deployments.

World‑class reliability.

Advanced L2 and L3 features including port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options like a multilingual web-UI, and industry standard CLI support, with support for multiple images and multiple configurations.

6x 10-Gigabit ports, physical stacking for more ports, and they have built-in G.8032 Ethernet Ring Protection Switching (ERPS) to help minimize recovery times to 50 ms. An USB 2.0 interface to store config files, boot images, and syslog. As well as support for an additional external redundant power supply on all models to ensure maximum uptime.

Stacked DGS-3130 series switches
Security

Comprehensive security.

Includes the latest security such as Multi-layer and Packet Content Access Control Lists (ACL), and Storm Control. And our exclusive D-Link Safeguard Engine has been designed to guard against traffic flooding caused by malicious attacks and protect your business network uptime.

IP-MAC-Port Binding allows you to bind a source IP address with an associated MAC and define the port number to enhance user access control. And DHCP Snooping makes the switch learn IP/MAC pairs by snooping DHCP packets and saving them to the IMPB whitelist, giving you extra control.

Easy Access Control policies.

They feature multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) for strict access control and an easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS) policies, and ACL rules can be assigned to each host.

Support for the Microsoft® NAP policy enforcement allows you to protect network assets from compromised computers by enforcing compliance with network health policies.

Access Policies

Versatile traffic management.

A rich set of multi-layer QoS/CoS features ensure that critical network services such as VoIP, video conferences, IPTV, and IP surveillance are always given high priority, and 10-Gigabit ports deliver the speed you need. Traffic Shaping features guarantee bandwidth for these services even when the network is busy. L2 Multicast support enables the DGS-3130 Series to handle growing IPTV applications.

Management

Host-based IGMP/MLD Snooping allows multiple multicast subscribers per physical interface while ISM VLAN allows the switches to send multicast streams in a multicast VLAN to save bandwidth, and to provide better security to the backbone network. The ISM VLAN profiles allow you to bind or replace the pre-defined multicast registration information to subscriber ports quickly and easily. Selective Q-in-Q enables you to be selective over VLAN traffic.

PoE+ with budgets up to 740W2

The 30PS and 54PS models have 370W PoE power budgets. Or utilise a total of 740W when adding a redundant power supply.

DGS‑3130 Switch Series

DGS-3130-30TS front
DGS‑3130‑30TS

· 24 x 10/100/1000BASE-T
· 2 x 10GBASE-T
· 4 x 10G SFP+

DGS-3130-30S front side
DGS‑3130‑30S

· 24 x SFP
· 2 x 10GBASE-T
· 4 x 10G SFP+

DGS-3130-30PS - front side
DGS‑3130‑30PS

· 24 x 10/100/1000BASE-T PoE
· 2 x 10GBASE-T
· 4 x 10G SFP+

DGS-3130-54TS front
DGS‑3130‑54TS

· 48 x 10/100/1000BASE-T
· 2 x 10GBASE-T
· 4 x 10G SFP+

DGS-3130-54S Front
DGS‑3130‑54S

· 48 x SFP
· 2 x 10GBASE-T
· 4 x 10G SFP+

DGS-3130-54PS front
DGS‑3130‑54PS

· 48 x 10/100/1000BASE-T PoE
· 2 x 10GBASE-T
· 4 x 10G SFP+

We're here to help

30 years

Over 30 years in the networking industry

Innovative end‑to‑end solution experts for small businesses to large corporations around the world.

Telephone Support

Talking to us is easy

Skilled local support in 16 countries. Our support teams are ready to help you.

D-Link Limited Lifetime Warranty

D‑Link Limited Lifetime warranty

The quality and reliability of D‑Link products enable us to provide an industry‑leading Limited Lifetime Warranty with every registration.

FAQ

  • DGS-3130 - Stacking Bandwidth Read Answer
  • What is the difference between Stacking Lite and Original D-Link Stacking? Read Answer
  • What is the cost of a switch in the new D-Link stacking Lite Technology ? Read Answer
  • What is the default IP address of my D Link Managed Switch ? Read Answer
Version Date Type File Size
Datasheet EN - PDF 0.35mb Download
Version Description Date Type File Size
CLI Manual 1.00 Revision A1 CLI Manual 06.07.2018 - - Download
WebGUI 1.00 Revision A1 WebGUI Reference Guide 06.07.2018 - - Download
Version Description Date Type File Size
QIG HW install 1.00 Revision A1 Hardware Installation Guide 06.07.2018 - - Download
Version Description Date
FW 1.01B027 Revision A1 Firmware 20.09.2018 Download
FW 1.01B026 Revision A1 Firmware 07.08.2018 Download
MiB 1.01B026 Revision A1 MiB file 07.08.2018 Download
Version Description Date
CE doc 3130-30PS 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-30S 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-30TS 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-54PS 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-54S 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-54TS 1.10 RevA1 CE document 20.12.2018 Download
CE doc 3130-30PS RevA1 CE document 22.06.2018 Download
CE doc 3130-30S RevA1 CE document 22.06.2018 Download
CE doc 3130-30TS RevA1 CE document 22.06.2018 Download
CE doc 3130-54PS RevA1 CE document 22.06.2018 Download
CE doc 3130-54S RevA1 CE document 22.06.2018 Download
CE doc 3130-54TS RevA1 CE document 22.06.2018 Download