To monitor and maintain your media converter modules, using theDMC-1002, there are two ways of connecting: ethernet(RJ-45) or serial connection (RS-232)
Connect by ethernet
Power off the chassis. Use cross-over CAT5/6cable, connect up to your computer. Power onthe chassis and verify that you see power lightlink light on the DMC-1002.
Set a static IP address on your PC, in the same range as yourDMC-1002, which is by default 192.168.1.1 (eg.192.168.1.5/24)
Then open Internet Explorer, and access the address
login using username: root password: root
Connect by serial connection
Power off the chassis. Use a female to femaleRS-232 cable, then connect your computer to the DMC-1002.
Run hyperterminal from a windows based machine (or any SSHclient for other OS). When creating a connection, choose Data Rate9600, 8bit, 1 etc.
To transfer files (eg. new firmware )between computer andDMC-1002, you will need to run a TFTP software on yourcomputer.
You may download the software from D-Link, compatible withWindows.