Wireless Selectable Dual‑Band Unified Access Point

DWL 3610AP

  • Product Status (Revision a): Live
The DWL-3610AP Wireless Selectable Dual-Band Unified Access Point is designed for small to medium businesses and enterprises, providing unparalleled bandwidth and flexibility for medium to large scale Wi-Fi networks. With selectable dual-band support, DWL-3610AP allows you choose the most suitable band for your network.

Download the datasheet.

List Retailers

Versatile Selectable Dual‑Band Access Point.

The DWL-3610AP Wireless Selectable Dual-Band Unified Access Point provides high bandwidth and flexibility for medium to large scale Wi-Fi networks.

DWL-3610AP Wireless Selectable Dual‑Band Unified Access Point

Key Features

DWL-3610AP selectable band
Selectable band1

Universal 2.4 GHz or less congested 5 GHz wireless band

DWL-3610AP wireless controller
Wireless controller

Compatible with D‑Link's Wireless controller and Unified Switch

DWL-3610AP self configuring cluster
AP-Array support

Multiple APs can be set to form self-configuring clusters

AP Array
Automatic RF Management

Automaticly set non-interfering channels

DWL-3610AP stand alone clustered

Standalone, Clustered or Centrally Managed

The DWL-3610AP can be used as a standalone Access Point, clustered or centrally managed via a D-Link Wireless Controller or Unified Switch. Central management allows for a large number of APs to be deployed and managed easily and efficiently.

AP Array

The DWL-3610AP self-configuring cluster allows a small number of access points to be set to form a self-configuring cluster. Once the administrator configures one access point, the same configuration is automatically applied to all remaining APs.

DWL-3610AP self configuring cluster

Automatic RF Management

Access points in close proximity usually experience interference between channels where RF Management is not implemented.

When a DWL-3610AP senses a neighbour nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference and allows APs to be deployed more densely.

To further minimise interference, when a nearby AP is on the same channel, the DWL-3610AP will automatically lower its transmission power3.

When, for whatever reason, the nearby AP is no longer present, the DWL-3610AP will increase its transmission power to expand coverage.

DWL-3610AP RF management
DWL-3610AP greater reach

Greater Reach and Flexibility

The internal omnidirectional antenna eliminates dead spots and fills hard-to-reach places. Selectable radio mode allows the DWL-3610AP to work on either the 2.4 GHz band or 5 GHz band. Airtime fairness ensures that equal airtime is given to each client, providing increased performance even if slower devices are connected.

Quality of Service

The DWL-3610AP supports 802.1p Quality of Service (QoS) for enhanced throughput and better performance of time-sensitive traffic like VoIP and video conferencing.

Furthermore, when a number of DWL-3610AP units are in close proximity to each other, an access point will refuse new clients once its resources are fully utilised, allowing the association request to be picked up by a neighbouring unit, distributing the load over multiple APs.

DWL-3610AP QoS

1. The access point can only operate on an individual band at any given time. It does not broadcast both bands simultaneously. If you are looking for a concurrent dualband access point please look at DWL-6610AP. 2. Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range. 3. This feature is available when Unified AP is used in conjunction with D-Link’s line of Unified Wireless Switches/controllers.

Related Products

Wireless Controller
DWC-1000
Find out more
Wireless Controller
DWC-2000
Find out more
Wireless AC1200 Dual‑Band Outdoor Unified Access Point
DWL-8710AP
Find out more
Unified Wireless AC1750 Dual‑Band Access Point
DWL-8610AP
Find out more
Wireless AC1200 Dual‑Band Unified Access Point
DWL-6610AP
Find out more
Type Hardware-managed AP
Wireless standard Wireless N
Frequency band mode Dual-band selectable
Wireless speed 300 Mbps 2.4 GHz

867 Mbps 5 GHz
Antenna type Embedded omni-directional antennas
Antenna gain 3 dBi for 2.4 GHz

3 dBi for 5 GHz
Power-over-Ethernet Yes
Wired interface 1 x Gigabit Ethernet LAN
Console port
Supported
Indoor/outdoor Indoor
Type of housing Plastic
Wireless modes Access Point (AP)

WDS bridge

WDS with AP
Advanced features MIMO
Maximum number of SSIDs 16
Auto channel selection
Supported
WMM-PS/802.11e (U-APSD)
Supported
Wi-Fi scheduler
Supported
AP traffic load balance
Supported
L2 roaming
Supported
WEP 64/128 bit
Supported
WPA/WPA2-Personal/Enterprise
Supported
TKIP/AES encryption
Supported
WPA_WPA2_PSK over WDS
Supported
WLAN partition
Supported
SSID broadcast disable
Supported
Rogue AP detection
Supported
Station isolation
Supported
MAC address filtering
Supported
802.1X authentication
Supported
Wireless controller/unified switch managed features AP load balance

Auto-channel, auto-RF management

Captive portal

L2/L3 fast roaming

Rogue AP mitigation

View neighbour AP information

WIDS/WIPS
Supported D-Link Wireless Controllers/Unified Switches DWC-1000

DWC-2000

DWS-3160

DWS-4026
Management platform Hardware controller: DWC/DWS Series
WEB
Supported
SNMP (v1, v2c, v3)
Supported
CLI
Supported
Telnet
Supported
SSH
Supported
Syslog
Supported
Configuration group sync through AP Array (up to 8 APs)
Supported
Version Date Type File Size
Datasheet - PDF 0.61mb Download
Version Description Date Type File Size
Manual 6.61 Revision All Product Manual 11/9/2018 - - Download
Version Description Date Type File Size
QIG - 14/11/2016 - - Download
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
 
http://tsd.dlink.com.tw/GPL.asp
 
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Version Description Date
4.6.0.6 Firmware 7/8/2018 Download
Version Description Date
CE Doc DWL-3610AP CE DoC 3/5/2017 Download