How do I add a mydlink‑enabled device to my account if it's currently registered to another account?

If your device is registered with another mydlink account, you will need to remove it from the account it is currently registered with, or you will need to hard reset your device back to the factory default settings. After doing this, you will be able to register the device to your mydlink account.

To remove a device from a mydlink account:

1. Sign in to the mydlink account the device is registered to.

2. Select your device, then go to its Settings page and click the Remove Device button.

To hard reset a device back to the factory default settings:

1. Make sure your device is plugged in and powered on, then use an unfolded paperclip to press and hold the RESET button for at least 20 seconds.

2. Wait about 60 seconds for the device to reboot.

Rank: 1.5

Otros usuarios también consultaron:

  • Active X fails to install during my mydlink camera setup Ver respuesta
  • Error Unable to connect to mydlink website during Setup Wizard Ver respuesta
  • How do I add a mydlink-enabled device to my account if it's currently registered to another account? Ver respuesta
  • How do I connect my camera wirelessly using Wi-Fi Protected Setup(WPS)? Ver respuesta
  • How do I set up a mydlink-enabled Cloud Camera? Ver respuesta
  • How to add 2nd camera to the same mydlink account? Ver respuesta
  • I'm using the Setup Wizard for my camera, but it won't let me save the camera's password. Ver respuesta
  • I'm getting error Cannot find Camera during my Mydlink camera setup Ver respuesta
  • I'm getting error Unable to add this device to your mydlink account during my mydlink camera setup Ver respuesta
  • What should I do if I can NOT set the device password Ver respuesta
  • What should I do if I forget my mydlink-enabled products device password Ver respuesta
  • What should I do if the setup wizard can't find my device? Ver respuesta