How do I enable WEP encryption on my DWL-700AP?

Step 1 Log into the web-based configuration byopening up a web browser and typing in the IP address of the accesspoint (

Step 2 The default username is admin (all lowercase) and the password is blank (nothing). ClickOK.

Step 3 Click on the Home tab andthen click Wireless on the left side.

Step 4 Click the Enabled radiobutton.

Step 5 Next to WEP Encryption, select the level ofencryption (64 or 128 bit).

Step 6 Next to Key Type, selectHEX or ASCII. You will need touse the same key on all your wireless devices.

· HEX - use 0-9 and A-F only.

· ASCII - All numbers and letters.

Step 7 You can enter up to 4 different keys.Select the key you want to use by clicking on the correspondingradio button.

Step 8 Enter your encryption key. You make this upyourself. If you selected HEX, then enter a key made up of acombination of numbers (0-9) and letters (A-F). For example -A4572BCC19 (HEX).

Step 9 Click Apply to savesettings.

Note: If you are configuring your access pointfrom a wireless adapter, you will lose connectivity as soon as youclick Apply. You must enable WEP on your adapter and enter the sameexact key as you entered on your access point.

Rank: 1.5