xStack 24‑Port Gigabit L2+ Stackable Switch

DGS‑3427

  • Dostupnost produktu: End of Life

There's a new version of this product:

Gigabit Layer 3 Stackable Managed Switches

DGS‑3130 série

See Newer Product

There's a new version of this product:

DGS‑3130 série

Gigabit Layer 3 Stackable Managed Switches

Informace

  • Jednotný firmware s výkonnými L2 a L3 funkcemi
  • 6x 10 Gigabit porty
  • Gigabit Ethernet porty s 6kV přepěťovou ochranou
  • Power over Ethernet (PoE) modely, až 740W s redundantním zdrojem
  • NBD služba pro výměnu následující pracovní den v ceně
  • Omezená doživotní záruka po registraci
See Newer Product

Informace

  • Jednotný firmware s výkonnými L2 a L3 funkcemi
  • 6x 10 Gigabit porty
  • Gigabit Ethernet porty s 6kV přepěťovou ochranou
  • Power over Ethernet (PoE) modely, až 740W s redundantním zdrojem
  • NBD služba pro výměnu následující pracovní den v ceně
  • Omezená doživotní záruka po registraci
See Newer Product
The xStack DGS-3400 series of next generation switches delivers performance, flexibility, security, multi-layer Quality of Service (QoS) and redundant power option for the SMB and enterprises. With high Gigabit port densities for desktop connections, SFP fiber connectivity, 10-Gigabit uplink options and enhanced Layer 2+ functions, these switches comprise the workgroup access-layer stack for seamless integration with L3 core switches to form part of a multi-level network structured with high-speed backbone and centralized servers.

Unparalleled Flexibility.


Any switch in the DGS-3400 series can operate as a stand-alone device or part of a scalable stack. Embedded with Single IP Management capability, a standalone switch can form part of a virtual stack, where intra-stack traffic flows through the usual network wires, doing away with the costly stacking cables. Without stacking cables, cable distance barriers and physical stacking limitations, a virtual stack can comprise units that are located anywhere on the network that minimizes the impact of any single point of failure.

Redundant Ring Stacking.

Alternatively, optional 10-Gigabit modules can be installed in the open slots to create a physical stack. Up to 12 units or 576 Gigabit ports can be configured for a stack.1 Users can install one or two single-port modules, depending on whether the linear or fault-tolerant Ring stacking is implemented. With each of these ports providing 20Gbps full duplex transmission on the cost-effective coaxial cable, the DGS-3400 series provides not only high-bandwidth stacking but also cost control capability that allows users to add ports strictly on a per need basis. Modules with single 10-Gigabit XFP can also be installed in any of the open slots for uplink to servers or a fiber backbone.

More Intelligent Than Simple Layer 2 Switches.

The DGS-3400 series provides a complete set of security features, which includes L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. In addition, it offers suppression capabilities and Layer 3 IP v.4/v.6 Static Routing to increase network performance and security. Built-in D-Link ZoneDefense technology allows business to integrate the switch stack with D-Link NetDefend firewalls to implement a full coverage, proactive security architecture.

Security, Performance & Availability.

The DGS-3400 series provides extensive VLAN support including GARP/GVRP and 802.1Q VLAN to enhance security and performance. To support converged applications including VoIP, ERP, Intranet and video conference, a robust set of L2/L3/L4 QoS/CoS features ensures that critical network services are served with proper priority. For prevent malicious flooding traffic caused by worm/virus infections, the DGS-3400 series provides D-Link Safeguard Engine to increase the switch's reliability, serviceability and availability. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, per-flow bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols.

Actual product appearance may differ from the image displayed on this page

Související produkty

SFP 1000Base‑LX Single‑Mode Fibre Transceiver (10km)
DEM-310GT
Zjistěte více
SFP 1000Base‑SX Multi‑mode Fibre Transceiver (550 m)
DEM-311GT
Zjistěte více

Technické specifikace produktu

FAQ

Produktová podpora

This product was phased out on: 24.02.2014
This product's last date of support is on: 23.02.2019
Version Date Type File Size
Datasheet (English) - PDF 0.72mb Stáhnout
Version Description Date Type File Size
Manual Manual - PDF 28.93mb Stáhnout
Version Description Date
Firmware 2.70B56 Firmware 05.11.2010 Stáhnout
MIB Firmware 2.60

MIB Firmware

05.11.2010 Stáhnout
Version Description Date
DEU_CE_A2_EN_FR_RevA Certificate of Declaration A2 (English and French) 21.05.2009 Stáhnout