How to Set the Time and Date – DSR-500N and DSR-1000N
NOTE – To configure the Time and Date your will need the following:
• Console Cable
• PuTTy
Step 1 – Download PuTTy software from the following link:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Download the putty.exe
Step 2 – Connect the serial port of the DSR with your PC
Step 3 – Open PuTTy and setup a COM port (this will be present in device manager)
Step 4 – Click on “Open”
Step 5 – Hit enter key and you should be presented with the Login screen
Set the time and date variables (Copy and paste into CLI):
Step 6 – Enter the following command to enter into the system time configuration
D-Link DSR> system time
Step 7 – Enter the following command to disable the ntp servers
system-config[time]> configure_ntp_servers n (Y/N)
Step 8 – Enter the following command to configure the correct time-zone
system-config[time]> time_zone GMT::Greenwich-Mean-time-Dublin--Edinburgh--Lisbon--London
Step 9 – Enter the following command to enable daylight savings
system-config[time]> enable_daylight_saving y (Y/N)
Step 10 – Enter the following command to configure year
system-config[time]> ntp_year 2014 (1970 - 2037)
Step 11 – Enter the following command to configure month (1-12)
system-config[time]> ntp_month 12
Step 12 – Enter the following command to configure day (1-31)
system-config[time]> ntp_day 30
Step 13 – Enter the following command to configure hour (0-23)
system-config[time]> ntp_hour 23
Step 14 – Enter the following command to configure minutes (1-60)
system-config[time]> ntp_minutes 46
Step 15 – Enter the following command to configure seconds (0-60)
system-config[time]> ntp_seconds 30
Step 16 – Enter the following command to sabe
system-config[time]> sabe
Tue Dec 30 23:13:30 GMT 2014
Tue Dec 30 23:13:30 GMT 2014
system-config[time]> exit
Step 17 – To confirm the date and time have been successfully configured
D-Link DSR> show system time setup
3 Други потребители намират това за полезно.
Беше ли това полезно за Вас?3 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How to Upgrade the Firmware – DSR-500N and DSR-1000N via CLI? Прочети отговорите