How do I configure the Remote Management feature on my DSL-G624M?
Remote Management allows the device to beconfigured remotly from the Internet using a webbrowser.
Step 1. Open up a web browser and type in theIP address of the DSL-G624M (default is 192.168.1.1). PressEnter.
Step 2. Type in the username and password(default is admin/admin). Press OK.
Step 3. Click on Tools at thetop and then click on Admin on the left.
Step 4. Configure the following options underthe Remote Management section:
- Set Remote Management to Enabled
- IP Address - the entry will have an asterisk(*) by default to allow all IP addresses. Type in an IP address toallow only this IP address access to the remote management
- Port - select the port for remote management.Options available are (80, 88, 1080, 8080/ default selection is8080)
Click on Apply to apply the changes.
Step 5. Select Yes to andclick OK to save and reboot the DSL-G624M with thenew settings.
68 Други потребители намират това за полезно.
Беше ли това полезно за Вас?68 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.