I'm getting error Unable to add this device to your mydlink account during my mydlink camera setup
Issue
Step 1: Ensure the link between the mydlink camera and the router is good. (The router must be online) and the camera must be powered on with a GREEN LED.
Step 2: Reset the mydlink camera to factory defaults:
- Locate the reset pinhole located on the back of the mydlink camera
- Press and hold the RESET button for 6-10 seconds while your camera is powered on. The LED will turn RED and the camera will reboot.
Step 3: Close and re-run the setup wizard
62 Други потребители намират това за полезно.
Беше ли това полезно за Вас?62 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- Active X fails to install during my mydlink camera setup Прочети отговорите
- Error Unable to connect to mydlink website during Setup Wizard Прочети отговорите
- How do I add a mydlink-enabled device to my account if it's currently registered to another account? Прочети отговорите
- How do I connect my camera wirelessly using Wi-Fi Protected Setup(WPS)? Прочети отговорите
- How do I set up a mydlink-enabled Cloud Camera? Прочети отговорите
- How to add 2nd camera to the same mydlink account? Прочети отговорите
- I'm using the Setup Wizard for my camera, but it won't let me save the camera's password. Прочети отговорите
- I'm getting error Cannot find Camera during my Mydlink camera setup Прочети отговорите
- What should I do if I can NOT set the device password Прочети отговорите
- What should I do if I forget my mydlink-enabled products device password Прочети отговорите
- What should I do if the setup wizard can't find my device? Прочети отговорите