How do I enable a new camera in D-ViewCam?
D-ViewCam is a powerful software package from D-Link which may be purchased separately. It is useful for monitoring a large network of up to 32 cloud cameras
Step 1: Launch the D-ViewCam console. Once the console loads, click on the General Settings icon, then Setting, and then click System Setting.
Step 2: Click on the Camera tab.
Step 3: Click Start Scan to automatically find the IP camera(s) that are on your Local Area Network (LAN).
Step 4: Select one of the IP cameras that are available by checking the box in the left-hand column. You may enter a new name for this camera and then enter the administrator username and password assigned to this camera in the fields provided. Click OK to add the camera.
Step 5: The pop-up window will close and the new camera should appear on the list.
If a camera does not support UPnP, you can manually add a camera as per the below instructions.
Step 1: Click Insert to manually add a network camera that is on your Local Area Network (LAN). The IP Camera Video/Server Setting window will appear.
Step 2: Enter the following network information for your camera:
• Name - Enter a name for your camera.
• IP Address - Enter the IP address of this camera. If you want to use a domain name, then check the DNS box and enter the domain name.
• HTTP Port - 80 is the default port.
• User Name - Enter the administrator user name for this camera.
• Password - Enter the administrator password for this camera.
• Protocol - Select TCP, UDP or HTTP.
Enter the following device information for your camera, or click Auto Detect to detect the vendor and model information.
• Vendor - Select the brand name from the dropdown menu.
• Camera Model - Select the camera model from the drop-down menu.
• Video Channel - Select the video channel you want to assign the camera
Step 3: Click OK to add your camera.
20 Други потребители намират това за полезно.
Беше ли това полезно за Вас?20 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I access my mydlink camera remotely? Прочети отговорите
- How do I change the LAN IP address of my camera? Прочети отговорите
- What can I do when Active X fails to install during my mydlink camera setup? Прочети отговорите
- How do I configure motion detection on my camera? Прочети отговорите
- How do I configure the audio settings on my DCS-5020L? Прочети отговорите
- How do I manually upgrade the firmware on my camera? Прочети отговорите
- How do I mount my camera to a wall or ceiling? Прочети отговорите
- How do I reset my camera to factory default settings? Прочети отговорите
- How do I set an administrator (admin) password on my DCS-5020L? Прочети отговорите
- How do I set up and install my DCS-5020L? Прочети отговорите
- How do I set up motion detection and recording in D-ViewCam? Прочети отговорите
- How do I set up scheduled recording in D-ViewCam? Прочети отговорите