How do I install the DFE-530TX in SCO Unix 3.2.4x?
1 Login to the network as root. (On maintenancemode)
2 Insert the driver diskette in Drive A or Drive Band use the
doscp command to copy the SCOUNIXDriver into the UNIX directory.
example:
# cd /
# doscp a:/scounix/setup setup
(or # doscp b:/scounix/setup setup)
# chmod x /setup
# ./setup a:/scounix
(or # ./setup b:/scounix)
3 Add a chain by executing the netconfigcommand
example:
#netconfig
A menu similar to the followingappears on the screen:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q) Quit
4 Select option 1 "Add a chain".
The following prompt appears:
Select top level of chain to Add or q to quit:
5 Select sco_tcp for SCO TCP/IP for UNIX.
The following messageappears:
Select next level of chain to Add or q to quit:
6 Select p30430. This value variesaccording to your card number.
The following prompt appears:
Add chain sco_tcp->p30430 (y/n):
7 Type "y" for yes.
The following messageappears:
Please select Driver Mode: (1) Auto (2) 100 Full
(3) 100 Half (4) 10 Full (5) 10 Half
Please input your select (1-5):
8 Type in the media mode number. Ex: selct 1for Auto.
The following messageappears:
Input your PCI ID (ENTER is recommended, or 12 hex digits):
9 Specify the internet address (IP address)of the interface.
The following messageappears:
Enter the netmask for this interface:
10 Specify the subnet mask for the interface.Please consult the systems
administrator if it is unknown.Default mask is 255.255.255.0.
The following messageappears:
Does the interface use a broadcast address of all 1's (y/n):
11 Answer this question accordingly. Defaultis "y".
The following messageappears:
Enter the broadcast address for this interface:
12 Type in the broadcast address for theinterface.
The following messageappears:
Are these values correct ? (y/n)
13 If all values are correct, type "y". Otherwise,answer "n" and
repeat the process.
The following messageappears:
XX Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q]
14 Type "q".
The main menu reappears on thescreen:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q)Quit Select option:
15 Select "q".
The following messageappears:
Do you want to relink to kernel now ?
16 Type "y" for yes.
The following messageappears:
Do you want this kernel to boot by default (y/n)
17 Type "y" for yes.
The following messageappears:
Do you want the kernel environment rebuilt (y/n)
18 Type "y" for yes.
19 Reboot UNIX by typing the following:
#shutdown -y -g0
2 Други потребители намират това за полезно.
Беше ли това полезно за Вас?2 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.