How do I install my DFE-530TX in UNIX?
1) Enter the following commands at the UNIX prompt. Remember, UNIX is
case sensitive.
1:mkdir /temp
2.cd /temp
3:mcopy a:via-rhine.c. (copies from DOS disk tocurrent working directory)
mcopya:pci-scan.c . (mcopy ismtools if you don't have mtools,you can mount -t /dev/fd0 and usecp command)
mcopya:pci-scan.h .
mcopya:kern_compat.h.
mcopya:Makefile .
2) type
make clean
make all
to generate via-rhine.o&& pci-scan.o
3) Run netconfig to set you networkparameter(like ip,gateway),This will create
'/etc/rc.d/inet1' and 'inet2'files.
4) you must modify /etc/rc.d/rc.inet1 toinsmod driver.This file will run at
boot time.
1:add a line inrc.inet1:
2:cd /etc/rc.d
3:virc.inet1
4:insmod /yourdriver'path/via-rhine.o(pci-scan.o must in the samedirectory)
5:ex:insmod/usr/src/linux/modules/via-rhine.o (must before bindprotocal)
6:shutdown -hnow (then your driver will work every time youboot.)
0 Други потребители намират това за полезно.
Беше ли това полезно за Вас?0 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.