How do I configure WPA (RADIUS) on my DWL-G730AP?
WPA can only be configured on the DWL-G730AP in AP (Access Point)mode.
Step 1 Open a web browser and type the IP addressof the DWL-G730AP in the address bar (default is 192.168.0.30).Press Enter.
Step 2 The default username isadmin (all lower case) and the default password isblank (nothing). Click OK.
Step 3 Click the Home tab andthen click Wireless to the left.
Step 4 Next to Authentication selectWPA using the radio buttons.
Step 5 Next to Radius Server 1 IP enterthe IP address of the RADIUS server. Next to Port enterthe port number of the RADIUS server. Next to SharedSecret enter the shared secret key.
Repeat for Radius Server 2 if applicable.
Step 6 Click Apply and then clickContinue to save the new settings.
3 Други потребители намират това за полезно.
Беше ли това полезно за Вас?3 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.