How do I configure the wireless settings on my DWL-810 wireless bridge?
Step 1 Open your web browser and enter the IPaddress of the DWL-810 (192.168.0.30). Enter your username (admin)and your password (nothing) if any. ClickOK.
Step 2 Click on Wireless.
Operation Mode: Use Ad-Hoc ifconnecting to another DWL-810 or a wireless network adapter. Ifconnecting to an access point or a wireless router, useInfrastructure (default).
SSID: Enter the SSID (Service Set Identifier). TheSSID can be up to 32 numbers and/or letters and is case-sensitive.The SSID must be the same on all wireless nodes on the wirelessnetwork. The default SSID is default.
Channel: If in Ad-Hoc mode, make sure the channelis the same as the other wireless nodes. You do not have to set thechannel if in Infrastructure mode.
Transmission Rate: Select the speed (transferrate). For best results, use Automatic.
WEP Enabled: Check if using WEP encryption.
WEP Key Length: If using encryption, choose whatlevel - 64-bit or 128-bit.
Deny Unencrypted Data: If using encryption, checkthis box to deny any request that is not encrypted.
Shared Key Authentication: Check box only whenusing encryption.
Step 3 Click Apply to savesettings.
2 Други потребители намират това за полезно.
Беше ли това полезно за Вас?2 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.