How do I mount my camera to the wall or ceiling?

Note: It is suggested that you configure the camera before mounting.

Step 1: The camera needs to be separated from the mounting base to expose the holes in the mounting base. Remove the camera head from the mounting base by firmly holding the camera with the D-Link logo facing you and then sliding the mounting base towards you.

picture

Step 2: Place the mounting base alignment sticker where you want to position the camera. Depending on the material of the wall or ceiling, use proper tools to drill two holes where you placed the alignment sticker. If the wall is made out of concrete, drill the holes first, then insert the plastic anchors to support the screws.

picture

Step 3: Place the mounting base over the holes that are in the wall. Make sure to align the mounting base holes with the holes in the wall. Use the supplied screws to attach the mounting base to the surface of the wall.
Note: Do not over-tighten screws as this may crack the mount.

picture

Step 4: With the D-Link logo facing you, reattach the camera to the mounting plate by sliding the camera towards you until it locks into position.

picture

Step 5: Adjust the angle of the camera as desired by rotating the camera body.

picture

Rank: 1.5

Dit kan ook interessant zijn:

  • How do I access my mydlink camera remotely? Lees antwoord
  • How do I change the LAN IP address of my camera? Lees antwoord
  • How do I configure Internet Explorer to allow ActiveX Controls? Lees antwoord
  • How do I configure motion detection on my camera? Lees antwoord
  • How do I configure the audio settings (audio out and microphone) on my DCS-6004L? Lees antwoord
  • How do I find the IP address of my DCS-6004L and access the web-based user interface? Lees antwoord
  • How do I manually upgrade the firmware on my camera? Lees antwoord
  • How do I set an administrator (admin) password on my DCS-6004L? Lees antwoord
  • How do I set up and install my DCS-6004L? Lees antwoord
  • What can I do when Active X fails to install during my mydlink camera setup? Lees antwoord
  • What do I do if I forget the Admin password for my camera? Lees antwoord