Wireless N Dual Band PoE Access Point

DAP‑2590

  • Product Status: End of Life

Compatibility and performance

With adjustable antennas, the DAP-2590 delivers 300Mbps per band performance

Broadcast 16 independent SSIDs simultaneously

Supports up to 16 SSIDs, 8 per Band, including station isolation

Performance and Compatibility

The DAP-2590 is a second generation Dual-Band Wireless N indoor access point designed specifically for businesses. It’s varied and comprehensive management capabilities ensures that the DAP-2590 meets the needs of almost any business.

Simultaneous Dual-Band Wireless

Supports up to 300Mbps for the 5Ghz band and up to 300Mbps for the 2.4Ghz band

Smart Design

The DAP-2590 has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

Type
Software Managed AP
Wireless standard
Wireless N
Frequency band mode
Dual-band selectable
Antenna type
3 detachable omni-directional antennas
Antenna gain
4 dBi for 2.4 GHz

6 dBi for 5 GHz
Power-over-Ethernet
Yes
Wired interface
1 x Gigabit Ethernet LAN
Indoor/outdoor
Indoor
Type of housing
Metal
Plenum rated (UL-2043)
Supported
Wireless modes
Access Point (AP)

WDS bridge

WDS with AP

Wireless client
Geavanceerde Eigenschappen
MIMO
Maximum number of SSIDs
8
Auto channel selection
Supported
WMM-PS/802.11e (U-APSD)
Supported
Wi-Fi scheduler
Supported
AP traffic load balance
Supported
L2 roaming
Supported
WEP 64/128 bit
Supported
WPA/WPA2-Personal/Enterprise
Supported
TKIP/AES encryption
Supported
WPA_WPA2_PSK over WDS
Supported
WLAN partition
Supported
SSID broadcast disable
Supported
Rogue AP detection
Supported
Station isolation
Supported
MAC address filtering
Supported
802.1X authentication
Supported
DHCP server
Supported
802.1D STP
Supported
IGMP snooping
Supported
ARP spoofing
Supported
NTP
Supported
WEB
Supported
SNMP (v1, v2c, v3)
Supported
CLI
Supported
Telnet
Supported
SSH
Supported
Syslog
Supported
Central management (through AP Manager II and/or D-View Wireless Control Module)
Supported
Configuration group sync through AP Array (up to 8 APs)
Supported

FAQ

  • Where can I find the MAC address of my access point? Lees antwoord
  • Why can't I access the web-based configuration for my D-Link router print server or access point? Lees antwoord
This product was phased out on: 15/05/2016
De laatste dag dat ondersteuning beschikbaar is voor dit product is op: 14/05/2021
Versie Datum Type Bestandsgrootte
Datasheet (English) - PDF 4.47mb Download
Versie Beschrijving Datum Type Bestandsgrootte
Manual (English)

Manual (English)

- PDF 3.69mb Download
AP Manager II - User AP Manager II - User Manual (English) - PDF 5.96mb Download
Versie Beschrijving Datum Type Bestandsgrootte
Quick Installation Guide (Multilingual) - PDF 1.91mb Download
Dit D-Link product bevat software code welke ontwikkeld is door derden, waaronder software code die valt onder de GNU General Public License ("GPL") of GNU Lesser General Public License ("LGPL"). Indien van toepassing: de voorwaarden van de GPL en LGPL en informatie over het verkrijgen van toegang tot de GPL-code en LGPL-code die in dit product zijn gebruikt, zijn hier voor u beschikbaar:
 
http://tsd.dlink.com.tw/GPL.asp
 
De GPL-code en LGPL-code die gebruikt is in dit product wordt gedistribueerd ZONDER ENIGE GARANTIE en is onderworpen aan de auteursrechten van een of meer auteurs. Voor meer informatie, zie de GPL-code en de LGPL-code voor dit product en de voorwaarden van de GPL en LGPL.
Versie Beschrijving Datum
Firmware 1.25rc056

Firmware

15/05/2013 Download
Firmware 1.20 rc039 Firmware 26/07/2012 Download
Versie Beschrijving Datum
MIB file 1.15 rc012 MIB file 15/08/2011 Download
AP Manager II v 1.13 1.13 r38

AP Manager II v 1.13

Release notes enclosed.

6/01/2011 Download
Versie Beschrijving Datum
CE doc 1.00 Revision A2 CE document 12/03/2014 Download